Manual

BEFORE OPERATING
. TOUCHMICROWAVEDRAWER
PADTO VIEWMICROWAVE
DRAWERHOMEPAGE.
TOUCHLOWEROVEN PAD
" TO VIEWLOWEROVEN
HOMEPAGE.
Before operating your new range make sure you read and understand this operation manual completely.
* Before the range can be used, follow these steps:
t Plug in the range. The display will read, "Please _ alt 30 seconds. After 30 seconds, you can select either Video I)emo or Set Clock.
2 Touch Set Clock and follow the instructions below.
Note:
* If no choice is made for 30 seconds, the Video Dome will begin automatically. To cancel the Video Dome, Touch the
Stop/Clear pad and the display will return to the Home Screen. To set the clock, touch the Setup pad, touch Clock and follow
the directions on the touchscreen.
TO SET D&TE AND TiME
t_ _c_th keg Ib@b:,'_
"1 After touching Set Clock or Clock, enter the correct month
by touching Month repeatedly. The month appears in the
banner at the top of the display. When set for the correct month,
touch ENTER.
d_d f tte _q_
2 Enter the date by touching the number )ads on the control
panel. Example: for June 1,touch [_. Check the date in
the banner, then touch ENTER.
3 Enter the time by touching the number pads. Select AMiPM
and then touch ENTER.
4 The month, date and time will appear in the banner. The
display will return to the Home Screen.
Note:
If you make a mistake while setting the clock, touch Stop/Clear pad. The Home Screen will appear. To set clock again, touch
Setup pad on the control panel. Then touch Clock and follow the directions.
* If you want to change the setting of the time of day, Touch Setup pad and follow the directions.
If the electrical power supply to your range should be interrupted, the screen will intermittently show Video Dome or Set
Clock after the power is reinstated. If this occurs during cooking, the program will be erased. Simply touch Set Clock and
follow the directions.
13