Service manual

KB-5121KS/K/W

COOK TOP RADIANT HEATERS/HOT SURFACE INDICATOR REMOVAL

1. Disconnect the power source.

2. Refer to the disassembly instructions as previously stated.

3. After Cook Top Assembly is free, turn upside down (glass side down) on a protective surface to prevent

scratching (Fig. O-13).

4. Remove the (10) screws from Bottom Plate and place to the side.

5. Remove Heater Protect Cover (Fig. O-14).

6. Remove necessary spring strap from Radiant Element.

7. Unhook Radiant Element or Hot Surface Indicator wiring.

8. The Radiant Elements are now free.

9. Proceed in reverse to reinstall the Radiant Elements and/or Hot Surface Indicator.

Fig. O-13

Fig. O-14