Operation Manual

E-6
4
3
Fill in the usage
start date on the
Date Label.
Use the usage start date
as a guide for when the
lters should be replaced.
Date Label
Unplug the unit before installing
or adjusting the lters.
PREPARATION FOR USE
2
1
Remove the Back Panel.
Install the lters
Install the HEPA Filter.
To maintain the quality of the lters, they are packed in plastic bags and placed in the
unit. Be sure to remove the lters from the plastic bags and replace the lters in the
unit before initial use.
1
Gently push down on the
tabs, then tilt and remove the
back panel.
Remove the lters
2
Remove the Wash-
able Deodorizing Filter
(black) and HEPA Filter
(white) from the plastic
bags.
Back Panel
HEPA Filter
Washable
Deodorizing
Filter
HEPA Filter
Insert the Back Panel’s 2 bottom tabs
(left and right) into the small holes in the
unit, and slide the Washable Deodor-
izing Filter between the HEPA Filter and
the Back Panel.
Gently push in
the upper tabs
(left and right) to
lock in place.
FILTER INSTALLATION
1
2
Tabs on the top
Washable Deodorizing Filter
Back Panel
Bottom tabs
Upper tabs
Installing the filter backwards
will affect the performance of
the unit.
Please make sure that the HEPA Filter is
placed in proper orientation.
Tab
KC-C100E_Eng.indd 8 07.11.13 1:24:49 PM