Material Safety Data Sheet

BMZ BATTERIEN-MONTAGE-ZENTRUM GMBH
Am Sportplatz 28-30 · D-63791 Karlstein am Main
Tel: [phone] · Fax: [phone]
E-Mail: [e-mail] · Internet: www.bmz-gmbh.de
Geschäftsführer Sven Bauer
HRB-Nr. 5890 Aschaffenburg St. Nr.: 122/50444 Ust.-ID-Nr.: DE 811770243
Commerzbank BIC:COBADEFF795 IBAN:DE35795400490105770200 BLZ 79540049 Kto. 1057702
Sparkasse Aschaffenburg BIC:BYLADEM1ASA IBAN:DE71795500000240004283 BLZ:79550000 Kto. 240004283
Deutsche Bank BIC:DEUTDEFF508 IBAN:DE85508700050010501500 BLZ 50870005 Kto. 010501500
Seite 9 von 10
8. Schulungsprogramme und Qualifizierungsmaßnahmen für das entsprechende Personal;
und
9. Verfahren für die Sicherstellung, dass am Endprodukt keine Schäden vorhanden sind.
Note:
Cells and batteries, cells and batteries contained in equipment, or cells and batteries packed with
equipment, containing lithium in any form shall be assigned to UN numbers 3480 or 3481 as appropriate.
They may be carried under these entries if they meet the following provisions:
a) each cell or battery is of the type proved to meet the requirements of each test of the Manual of Test
and Criteria, Part III, sub-section 38.3;
b) each cell and battery incorporates a safety venting device or is designed to preclude a violent rupture
under normal conditions of carriage;
c) each cell and battery is equipped with an effective means of preventing external short circuits;
d) each battery containing cells or series of cells connected in parallel is equipped with effective means
as necessary to prevent dangerous reverse current flow (e.g. diodes, fuses, etc.)
e) cells and batteries shall be manufactured under a quality management program that includes:
1. a description of the organizational structure and responsibilities of personnel with regard to design
and product quality;
2. the relevant inspection and test, quality control, quality assurance, and process operation instruction
that will be used;
3. process controls that should include relevant activities to prevent and detect internal short circuit
failure during manufacture of cells;
4. quality records, such as inspection reports, test data, calibration data and certificates. Test data
shall be kept and made available to the competent authority upon request;
5. management reviews to ensure the effective operation of the quality management program;
6. a process for control of documents and their revision;
7. a means of control of cells or batteries that are not conforming to the type tested as mentioned in (a)
above;
8. training programs and qualification procedures for relevant personnel; and
9. procedures to ensure that there is no damage to the final product.
15. Vorschriften und Regelwerke
Regulatory information
Hinweise auf Vorschriften zur Beförderung gefährlicher Güter:
Notes to regulations concerning the transport of hazardous goods:
Gefahrgutbeförderungsgesetz (GGBefG)
Gefahrgutverordnung Straße, Eisenbahn und Binnenschifffahrt (GGVSEB)
Gefahrgutverordnung See (GGVSee)
Luftverkehrsgesetz (LuftVG), Luftverkehrs-Zulassungs-Ordnung (LuftVZO)
Europäisches Übereinkommen über die internationale Beförderung gefährlicher Güter auf
der Straße (ADR)