Operating Manual

Installation, assembly and commissioning for
the first time
Version 1.1 Page 49 of 92
Figure 4-12: pin assignment of RJ45 Y-adapter (T-connector)
4.7.2 Output contact
- All plus poles of batteries must be laid on a copper rail using the Bat Breaker Box.
- All minus poles of batteries must be laid on a copper rail using the Bat Breaker Box.
Important: A short-circuit between the lines from the plus pole of the battery and the minus pole of the battery
must be prevented under any circumstance.
Figure 4-13: output cable of BAT Breaker Box