User Manual

5. Communication
 Check Internet connection status
You can use the information on the LED lighting status to check the Internet connection
status.
 Function per LED
Upper LED: Turns on automatically when connected to the Internet line (Connection).
Lower LED: Blinks when there is data. (Rx, Tx)
 LED status on normal connection
The upper LED is On and the lower LED is blinking.
 LED status on abnormal connection
Both the upper and lower LEDs are turned Off.
 On abnormal connection
 Connect the LAN cable again, then check the LED status.
 Check whether the Router is Off.
 Contact the installation company for repair and maintenance.
5.3 Homepage
Any customer who has purchased this device can use a web browser
(https://myess.samsungsdi.com) or a smart phone to check its current operation status and
receive various statistical information on operation in the house or remotely.
5.3.1 Service Terms
This service is provided only when the device is connected to the Internet, and specific
services may require additional information only after approval from the customer.
5.3.2 Membership
To use this service, you must register for membership through our homepage. During
membership registration, the member’s information such as ID, password, name and the
address are collected, and additional data may also be collected to provide statistical
information upon customer
’s approval.
5.3.2.1 Signing up for a membership
1. Open the browser on an internet-connected device such as PC, notebook or smart
phone
2. Enter “https://myess.samsungsdi.com ”in the address field of the browser.
3. When you connect to the website successfully, the screen shown in [Figure 5-2] will
appear.
United Kingdom (Eng.) 05/2015. Rev1.1 27