User Manual
15
On-Screen Display Language Selection
Notes:
■
When starting the PRESET after setting
the SOUND SYSTEM with the MENU
button of Remote Control, the SOUND
SYSTEM for all channels are stored into
memory.
■
Unused channels are automatically
skipped.
■
The Preset mode is only available in the
TV mode and cannot be operated in the
AV mode.
PRESET
Sound System
NORMAL
SCREEN
Presetting the Channels (AUTO)
■ The MENU on the LCD TV set can
also be used to select the language.
■ Automatically tunes in and presets
receivable TV stations.
Make sure the antenna cable is
properly connected.
(Auto mode screen)
Front control panel
1 Press the MENU front of the LCD
TV set for more than two seconds to
display the PRESET mode screen.
2 Press the MENU twice to display
the LANGUAGE select mode
screen. Press the MENU again to
change the PRESET mode as
shown below.
AUTO → MANUAL → LANGUAGE →
3 Press the CH ( )/( ) to select
the language you wish to display.
4 Press the MENU to return to the
normal screen.
TV/VIDEO
DISPLAY
BRIGHTSLEEP
MENU
POWER
MPX
-/--
MENU
CH
VOL
Note:
■
Instead pressing the MENU button more
than two seconds, you can display the
LANGUAGE select mode by selecting
FEATURE
→
LANGUAGE on the
Menu screen.
1 Press the MENU (PRESET-1)
front of LCD TV set for more than
two seconds. The AUTO mode
screen appears.
2 Press the VOL (+) (PRESET-2)
front of LCD TV set.
All the TV stations in your area
that can be received by the LCD
TV set are automatically preset.
3 The screen shows whatever is on
channel 1 when full auto channel
preset is finished.
3
MENU
CHVOL
TV/VIDEO
12
PRESET
12
MENU
CHVOL
TV/VIDEO
12
PRESET
LANGUAGE
ENGLISH
MENU
SELECT:
EXIT:
1,2,4