User Manual

16
1 Press the MENU (PRESET-1)
front of the LCD TV set for more
than two seconds. The AUTO
mode screen appears.
2 Press the MENU (PRESET-1) to
display the MANUAL mode screen.
Press the MENU (PRESET-1)
again to change the MANUAL
mode as shown below.
3 Select the channel position using
the CHANNEL SELECT or
CH (
)/( ).
4 Press the VOL (+)/(–) to locate the
channel you want to preset to the
position. Search is initiated and
when a TV signal is received
during the search, the search
stops.
5 Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
6 Press the MENU (PRESET-1) to
return to the normal screen.
Note:
■ SOUND SYSTEM may not have been set
correctly, if noise can be heard or if there
is no sound.
In such case, reset to SOUND SYSTEM
using the MENU.
■ In a weak reception area, or under
bad reception conditions.
1 Press the MENU (PRESET-1)
front of the LCD TV set for more
than two seconds. The AUTO
mode screen appears.
2 Press the MENU (PRESET-1) to
display the MANUAL mode screen.
3 While the MANUAL mode screen
is displayed, press the MENU for
more than 2 seconds.
The channel position number
remains in green.
■ While the MANUAL mode screen is
displayed, press the MENU button.
(The LANGUAGE mode screen will
appear.)
4 Adjust for good reception using the
VOL (+)/(–).
5 After finishing the adjustment,
press the MENU (PRESET-1) to
continue channel presetting.
PRESET (Continued)
Sound System
Channel position
number
AUTO → MANUAL → LANGUAGE →
NORMAL
SCREEN
■ Setting a channel to a desired TV
station:
Presetting the Channels (MANUAL)
Auto mode screen
Manual mode screen
➡➡
Note:
Front control panel
CH
VOL
TV/VIDEO
DISPLAY
BRIGHTSLEEP
MENU
POWER
MPX
-/--
MENU
VOL(+)/(–)
CH ( )/
( )
CHANNEL
SELECT
1,2,63
MENU
CHVOL
TV/VIDEO
12
PRESET
4
1,2,3,5
MENU
CHVOL
TV/VIDEO
12
PRESET
4
LANGUAGE
ENGLISH
MENU
SELECT:
EXIT: