User Manual

ManualsBrandsSHARP ManualsLCDLC-13/15S1E

Changing Channels

You can select channels using Channel Select or CH (

)/( ).

To select a one-digit channel

(e.g. Channel 5):

Hold down the

button.

To select a two/three-digit channel

(e.g. Channel 15):

Press the

button.

Hold down the button.

• To handle the increasing number of channels available, this LCD TV set allows you

to select up to 200 channels (0 to 199).

Using CH ( )/( )

Press CH (

) and the channels change in the order shown below:

1 → 2 → 3 → . . . → 198 → 199 → 0 → 1 → 2 → 3 → . . .

Press CH (

) and the channels change in the order shown below:

3 → 2 → 1 → 0 → 199 → 198 → . . . → 3 → 2 → 1 → . . .

Note:

• Channel “0” is prepared for RF output of VCR.

Channel

Select

(

)/( )

Sound Volume

Basic Operation (Continued)

To adjust the volume

● Press i (+) to increase the sound

volume. The numerical value increases.

● Press i (–) to decrease the sound

volume. The numerical value decreases.

To mute the sound

● Press Mute to temporarily turn off the

sound. “Sound off” is displayed.

● Press Mute to turn off the Mute function.

“Sound on” is displayed.

• When i (+)/(–) is pressed in the Mute mode,

the sound turns on and the volume indicator is

displayed.

• The Mute function is cancelled when B is

pressed.

(+)/(–)

(Volume)

Mute

Sound off

Sound on

Volume

Using Channel Select

When selecting the channel using Channel Select, finish inputting the channel

number by holding down the button for the last digit for a moment.

TV/VIDEO

REVEAL

HOLD

END

MENUSOUND

SUBTITLE

SUBPAGE

TEXT

ROTATE

WIDE