Specifications

14
On-Screen Display Language Selection
Note:
• When starting PRESET after setting the
SOUND SYSTEM with MENU of the
Remote Control, the SOUND SYSTEM
for all channels are stored into memory.
• Unused channels are automatically
skipped.
• The Preset mode is only available in the
TV mode and cannot be operated in the
AV mode.
PRESET
Sound System
NORMAL
SCREEN
Presetting the Channels (AUTO)
■ MENU on the LCD TV set can also
be used to select the language.
■ Automatically tunes in and presets
receivable TV stations.
Make sure the antenna cable is
properly connected.
(Auto mode screen)
Upper control panel
1 Press MENU on the upper part of
the LCD TV set for more than two
seconds to display the PRESET
mode screen.
2 Press MENU twice to display the
LANGUAGE select mode screen.
Press MENU again to change the
PRESET mode as shown below.
AUTO → MANUAL → LANGUAGE →
3 Press CH ( )/( ) to select the
language you wish to display.
4 Press MENU to return to the
normal screen.
TV/VIDEO
DISPLAY
BRIGHTSLEEP
MENU
POWER
MPX
-/--
MENU
CH
VOL
Note:
• Instead of pressing MENU for more than
two seconds, you can display the
LANGUAGE select mode by selecting
FEATURE → LANGUAGE on the
Menu screen.
12
VOL CH MENU TV/VIDEO
12
PRESET
1 Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than two seconds. The
AUTO mode screen appears.
2 Press VOL (–)/(+) (PRESET-2)
on the upper part of the LCD TV
set.
All the TV stations in your area
that can be received by the LCD
TV set are automatically preset.
3 The screen shows whatever is on
channel 1 when full auto channel
preset is finished.
VOL CH MENU TV/VIDEO
12
PRESET
1,2,43
LANGUAGE
ENGLISH
MENU
SELECT:
EXIT:
* In this example, the LC-20B2MA
model is used. Refer to page 8
if you are using the LC-15B2MA
model.
Upper control panel