Manual

Part Names of the Main Unit
Upper control panel
CH (v)/(A) INPUT
MENU POWER
[] How to adjust the angle
Speaker
I Tilt the display by grabbing onto the
carrying handle while securely holding
dOWnt he stand with y°ur °ther hand J
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or !0 degrees backward. Please adjust
the angle so that the LCD TV set can be
watched most comfortably
OPC (Optical Picture
Control) sensor
Remote sensor
Headphone jack (Q)
Plug the headphone mini_plug into the headphone jack located
on the front of the main unit
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when "OPC" is set to "ON"
(See page 19)
POWER indicator
POWER indicator fights up green when the power is on,
and red when in the standby mode (the indicator will not Rightwhen the main
power is off)
• INPUT, CH (V)f(_%), VOL (-)t(+) and MENU on the main unit have the same functions as the same buttons on the remote control
Fundamentai_y, this operation manual provides a description based on operation using the remote control
1. Plug the headphone mini-plug into the headphone jack located on the front of the main unit
_' On-screen display
VOLUME
10 illlllJtll .............................................
Adjust the sound volume using VOL (+)/(--) on the
remote control
• Headphones are not included in the supplied accessories
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack
_.. • De not set the votome at a high _eve_ Hearing expe_ts advise against extended Iistening at high volume levels J