Manual

Connecting with E×ternaB Devices
= = HHI == =' ='= ::::::::::::::::::::::::::::::::::::::::::::::
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of
the LCD TV set
When connecting an external device, turn off the power of the LCD TV set first to prevent any possible damage,
Component cable
Y
P_
P_
Audio(L)
L_-, _--==z_ Audio (R)
Audio cabte
S-Video cabte
S-Video
Video _-
Audio (L)
" . Audio(R)
AudioNideo cable
AudioNideo cable Video _ I
Aod,o .t.
INPUT1 terminal (COMPONENT)
DVD player Dig_ta| TV tuner
* If your external device has a component
terminal, COMPONENT connection is
recommended (you can view high-quality
pictures)
INPUT2 terminal
Home video
game system Camcorder VGR
Ifyour external device has an S-video
terminal, S-VIDEO connection is
recommended
J
tNPUT3/OUTPUT terminal
Audioampl|fler VCR
. For the cable, use a commercially available audio/video cable
• PC connection is not possible
• For more information about externat device connections, see the operation manuals of your external devices
• Make sure that the corresponding cables are connected to each terminal Connecting other cables may resutt in a malfunction,
• INPUT2 has two video input terminals, VIDEO and S-VIDEO terminals If your external device has an S-VIDEO terminal, S-VIDEO
connection is recommended SWtDEO provides a finer, more detailed picture If both terminals are connected, S-VIDEO terminal takes a
priority
• For the INPUT1 mode, picture can be displayed onfy when 480t. 480P signal is received
I Outputting Video and Audio
(Video Output)
You can output video and audio signals from the LCD TV set through the INPUT3/OUTPUT terminals (See page 2&)
• When using INPUT3/OUTPUT as an output terminal, select "SETUP" in the Menu and set "INPUT3 SELECT" to "OUT"
• When using the S-VIDEO input for INPUT2 or COMPONENT input for tNPUTI, no video signal will be made to the INPUT3/OUTPUT
terminal, but audio signat will be made for connection to external audio systems
(_ 13