Manual

Basic Operation
Turning On and Off the Main Power
Switchingthe InputModes(INPUT1/INPUT2/INPUT3/TV)
POWER
POWER indicator
Press POWER The POWER indicator instantly changes
from red to green and the LCD TV set is turned on
On-screen display
1_ TEREO
SAP
MONO
• The on-screen display disappears in a few seconds
o To turn off the main power, press POWER again.
Standby
POWER
0
O0(i)
(g) QQ
To turn off the LCD TV set
Press POWER The POWER indicator wi]l turn red.
To turn the LCD TV set back on
Press POWER again The POWER indicator will turn green.
1
_ii _,
k'i :_iI
Turn on the power of the connected video equipment
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, 1NPUT3
and TV mode each time INPUT is pressed
INPUT1 mode
INPUTI
lNPUT2 mode
INPUT2
INPUT3 mode
]
INPUT3
TV mode
2 I
• INPUT1:
Used for video equipment connected to the COMPONENT
input terminals
• INPUT2:
Used for video equipment connected to the INPUT2
terminals.
The S-video input terminal is additionally provided for the
tNPUT2 terminal if both the S-video terminal and normal
video terminals are connected with cables, the S-video
input terminal takes priority
. INPUT3IOUTPUT:
lNPUT3 mode is used to adjust the preset settings and IN
or OUT can be selected INPUT3 indication is not displayed
when OUT is selected
(_ 15