Manual
Useful Features (Continued)
SLEEP TIMER NO SIGNAL OFF
You can set the SLEEP TIMER to automatically turn off the TV
POWEi_
0
AV MODE D_$1&AY
o_o
©000
Setting the SLEEP TIMER on the Menu screen
:i Press MENU to display the Menu screen
2 Press _/_ to select"OPTiON".
:3 Press Al'_r to select "SLEEP TIMER", and press
ENTER
14 Press ,,_,/V/"_I_" to select "30MiN", "60MIN", "90MIN",
"I20MIN", "150MIN" or "OFF", and press ENTER
i,:: 60M;l:N
20
::: 50M
5:: Press MENU to exit
. After you set the SLEEP TIMER, pressing POWER on the main
unit or POWER on the remote contro! will cancel the SLEEP
TIMER setting
• 5 minutes before the SLEEP TIMER turnsoff the LCD TV set.
'5MIN REMAINING" isdisplayed on the screen for 4 seconds
The SLEEP TIMER counts down and shows a similar 4-second
display for each remaining minute unfit the timer turns off the
LCD TV set
Directly setting the SLEEP TIMER
1 Press SLEEP to display the SLEEP TIMER screen
!
i
BLEEP TIh_E_ tO_Ft
2 Press SLEEP to change the setting
[150MINI, [120MINl- [90MINI
.... (minutes)
• The SLEEP TIMER screen automatically disappears in 3
seconds
The NO SIGNAL OFF function allows you to save energy
When set to "ENABLE", the power will automatically shut
down if no signal inputs for 5 minutes
1
3:1
,_.V_,_OOI_ B_SPLAY
o_o
Press MENU to display the Menu screen_
Press _/1_ to select "OPTION"
Press A/W to select "NO SIGNAL OFF", and press
ENTER
to
E _
press
•_ Press AIy select" NABLE, and ENTER.
D I S A:B L E
5; Press MENU to exit
• "DISABLE" is factory preset value
• This function can work only in TV mode
• If interferedwith by other broadcast or radio waves, "NO StGNAL
OFF" may not work properly even when the broadcast is over
NO OPERATION OFF
When set to "Enable", the power will automatically shut down
if there is no operation for 3 hours
1 Repeat steps 1 and 2 of NO SIGNAL OFF
2 Press ,&tY to select "NO OPERATION OFF", and
press ENTER
4¸¸¸¸
Press A/W to select "ENABLE", and press ENTER
D I iS A B LE
• 5 minutes before the power shuts down, remaining
time is displayed every minute
Press MENU to exit
• "DISABLE" is factory preset value
(_) 31