Manual

Troubleshooting
i i i i i i
[] Before calling for repair services, make the following checks for possible remedies to the encountered symptoms
LCD TV set]
Problem Check item
• Make sure the AC cord is properly inserted in the power
outleL
There is no • Reception other than those of broadcasting stations can -
picture or be considered
sound • Make sure the input mode is set to TV, 15
• Make sure the POWER switch of the main unit is on 15
...... 'Make sure the BRIGHTNESS is properly adjusied .... 20
There is no , Fluorescent lamp may have reached the end of service 34
picture,
There is no life.
picture from • Make sure the S-VtDEQ terminal has nothing connected 13
INPUT1/2/3. • Make sure the AUDIO ONLY is not set to ON.. 30
f__ • Make sure the volume is not set to minimum 16
q ._ • Make sure the sound is not set to mute 16
There is no • Make sure that headphones are not connected.. 10
sound
• Make sure the antenna came is properly connected_ 8, 9
There is no • Bad reception could be the problem.
picture or
sound, just
noise
• Make sure the antenna cable is properly connected. 8, 9
• Bad reception could be the problem -
Picture is not
clear
• Check color adjustment, 20, 2t
Picture is light
i or improperly
tinted.
• Press the BACKLtGHT button or set the BACKLIGHT or 20
: : }'_:_) BRIGHTNESS settings°
,:_'_ The picture is • Check CONTRAST and BRIGHTNESS adjustment. 20
: .......,,, too dark.
,0-,_::,,_:;. ":_....... Fluorescent lamp may have reached the end of service 34
' " life.
• Check the batteries of the remote control 7
Remote control does not work • Make sure the remote sensor window is not in strong 7
lighting.
• External influences such as lightning, static electricity,
etc,, may cause improper operation. In this case,
Unit cannot be operated, operate the unit after first turning the power off, or
unplugging the AC cord and re-plugging it in 1 or 2
minutes.
Reference page
9
(_ 33