Manual

Preparation (Continued)
. A 75-ohm coaxiat cable connector is built into the LCD TV set for easy hookup When connecting the 75-ohm coaxial
cable to the LCD TV set, screw the 75-ohm cable to the ANT terminal
• Some cable TV companies offer "premium pay channels", Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company
This converteddescrambler is necessary for normal viewing of the scrambled channels (Set your TV to channel 3
or 4, typically one of these channels is used If this is unknown, consult your cable TV company ) For more specific
instructions on installing cable TV, consult your cable TV company One possible method of utilizing the converter/
descrambler provided by your cable TV company is explained below
Please note: An RF switch provided with two inputs (A and B) is required (not supplied)
"A" position on the RF switch (not supplied): You can view atl unscrambled channels by using the TV's channel keys
"B" position on the RF switch (not supplied):You can view the scrambled channels via the converterldescrambier by
using the converter's channel keys
RF switch (not supplied)
Cable
TV line
. Consult your SHARP Dealer or Service Center for the type of splitter. RF switch or combiner that might be required
POWER
_._ _-/"-'_ _- AC INPUT terminal
!_ _'_ / (AC 120V)
Wall outlet
AC cord
• Unplug the AC cord from the LCD TV set and walt outlet when LCD TV set is not to be used for a long period of time