Manual

[]TV Screen Disp|ay Mode
2types ofdisplaymodescanbe selectedinthe digital modewhenthe
broadcastingstation issending 16:9videosignal
Press [VIEW MODE] repeatedly to switch theTV aspect
ratio
VIEWMODE
[] Sleep Timer
Thesleeptimer canbesetto autamatica[ly turn offtheunit after an
incrementalperiodof timer
_ Press [SLEEP] to set timesleep timer
SLEEP
SLEEP OFF
• Sleep timer display appears on timeTV screen
LETTERBOX ZOOM
[LETTERBOX]
Display the digital-supported program in full-screen
Black borders will spread in the upper and lower
screen
[ZOOM]
Enlarge and display the center area of tlme digital-
supported program
The right and left side of image will be cut off,
Note:
• Youmay not switch the di_;ploymode depending on fl}e
program
.In _?NPUTT' of the e_:ternolinput mode, you can also select
the display mode either "4:3(normal)" or "WIDE" when the
connectede_ternaldeviceoutputs480pvideosigna!and
d_efollowing is displayed on the TVseteen
F@_JT 2
4_OP
Select "WIDE" accordingly if your DVD video is recorded as
anamorphic widescreen
4:3 WIDE
,,_, Press [SLEEP] repeatedly to change the amount of
time until shut off
SLEEP
SLEEP 126!_{Zt
• You can set your unit to turn off after a set period of
time (from 30 to 150 minutes)
• Each press of [SLEEP] will increase the time by 30
minutes
• After set up, the sleep timer display can be called up
for checking by pressing [SLEEP]
To Cancel the Steep Timer
Press [SLEEP] repeatedly until "SLEEP OFF" is displayed
on the TV screen
Note;
• The sleep timer setting display will autoalatically disappear
in _0 seconds
, When you disconnect the unit from the AC outlet or when a
power failure occurs, the sleep timer setting will be canceled,
1
EN