Manual
(_-4
IMPORTANT SAFETY INSTRUCTIONS
i ii imll
• Water and Moisture -- Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry" tub in a wet basement; or near a swimming pool; and the like.
• Stand -- Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can
cause the product to fall resulting in serious personal injuries as well as damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the manufacturer or sold with the product. When mount ng the product on a wall,
be sure to follow the manufacturer's instructions. Use onfy the mounting hardware recommended by the manufacturer.
= Selecting the location -- Select a place with no direct sunlight and good ventilation.
• Ventilation -- The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar sudace, since they can block ventilation openings. This product is not
designed for built-in installation; do net piece the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat-- The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
The Liquid Crystal panel is a very h_gh technology product with 1,296,000 pixets, giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that
this does not affect the performance of your product.
• Lightning -- For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
• Power Lines -- An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
• Outdoor Antenna Grounding -- If an outside antenna is connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting
structure grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to ground ng e corrodes, and requ foments for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANS]/NFPA 70
ANTENNA
_ __...-.- LEAD IN WIRE
B
J GROUND ,._/" _ ]'_X ANTENNA
_ _,,_ DISCHARGE UNIT
(NEeSECTJON810-20)
!_ GROUNDING CONDUCTORS
oJ." g jgT,O.
-- _ POWER SERVICE GROUNDING ELECTRODE
SYSTEM
NEC -- NATIONAL ELECTRICAL CODE (NEC ART 250, PART H)
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not expose this product to dripping orsplashing.
No objects filled with liquids, such as vases, should be placedon the product.
• To prevent fire or shock hazard, do not place the AC cord under the P',/set er other heavy items.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Use a soft cloth and gently wipe the surface ofthe display panel. Using a hard cloth may scratch the panel surface.
• Use a soft damp cloth to gently wipe the panelwhen it is really dirty.
(It may scratchthe pane] surface when wiped strongly.)
• [f the panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To protect the pane], do not use a ditty cloth, liquid cleaners or chemicalcloth to clean it, such materiais may damage the
panel surface.
• Do not display astill picture for a long tirne, as this could cause an afterimage to remain.
• Install the product on the place where the AC cordcan be unplugged easily from the AC outlet, or from the AC INPUT
terminal on the rear of the product.
• CONDENSATION -- Moisture will form in the operating section of the player if the player is brought from cool
surroundings into a warm room orif the temperatureo| the room rises suddenly. When this happens, player's -,
performance will be impaired. To prevent this, let the player stand [n its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if
the player is exposed to the breeze from an air conditioner,In such cases, changethe location of the player.
• DISC SLOT -- Keep your fingers well clear of the disc slotas it is closing. Failure to do so may cause serious personal
injury,
• LASER BEAM -- Do not look intothe openingof the disc slot orventilationopeningofthe productto see the sourceofthe
laserbeam, Doingso may cause sightdamage.
• DISC -- Do not use a cracked, deformed, or repaired disc. These discsare easily brokenand may cause serious
personal injury and product malfunction.
• When transporting the TV, never carry[t by holding or otherwise putting pressure onto the display.