Service manual

6
LC-20B8U-S
LC-20B9U-S
LC-20B9U-SM
OPERATION MANUAL
Part Names of the Main Unit
Controls
• INPUT, CH (
)/(
), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
Headphone jack (
)
Plug the headphone mini-plug into the headphone
jack located
on the front of the main unit.
OPC (Optical Picture Control)
sensor
Remote sensor
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when "OPC" is
set to "ON".
POWER/WAKE UP TIMER indicator
POWER/WAKE UP TIMER indicator lights up green when the
power is on, and red when in the standby mode (the indicator will
not light when the main power is off), and orange when the wake-
up timer is set (the indicator will light when in the standby mode).
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or 10 degrees backward. The LCD TV set can
also be rotated up to 12 degrees to right and
left. Please adjust the angle so that the LCD
TV set can be watched most comfortably.
POWER
Upper control panel
INPUT
MENU
CH (Channel) (
)/(
)
VOL (Volume)
(–)/(+)
Speaker
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
How to adjust the angle
Listening with Headphones
ËPlug
the headphone mini-plug into the headphone jack located on the front of the main unit.
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Ë On-screen display
20
VOLUME
Adjust
the sound volume
using VOL
(
+
)/(
–
) on
the
remote
control.
Headphones
Speaker
Terminals
)
(
Carrying handle
Rear View
Y
P
B
P
R
AUDIO (L)
AUDIO (R)
Y
P
B
P
R
AUDIO (L)
AUDIO (R)
AUDIO
ANALOG RGB
S-VIDEO
AUDIO (L)
AUDIO (R)
VIDEO
AUDIO (L)
AUDIO (R)
VIDEO
INPUT2
(COMPONENT)
ANT
(Antenna terminal)
AC INPUT
(AC 110-240 V)
INPUT5
(PC-IN)
INPUT4/
OUTPUT
INPUT1
(COMPONENT)
INPUT3
Round lock for
Kensington Security
Standard slot*
)
(
How to Fix the Cables
• Secure cables and cords with the supplied cable clamp so that they do not get caught when mounting the cover.
Cable clamp
Pull down the hook
to open the cover.
* Using the Kensington Lock
• This LCD TV set has a
Kensington Security Standard
slot for use with a Kensington
MicroSaver Security System.
Refer to the information that
came with the system for
instructions on how to use it to
secure the LCD TV set.