Specifications

SERVICE MODE LIST
This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote
control for more than the standard time in the appropriate condition. (See below chart.)
If you set factory initialization, the memories are reset such
as the channel setting, and the POWER ON total hours.
Operations
POWER ON total hours are displayed on the screen.
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
Check of the SUM DATA, POWER ON total hours, MICON
VERSION and DIGITAL TV MICON FIRMWARE on the screen.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
Releasing of V-CHIP PASSWORD.
Initialization of factory TV data.
NOTE:
Initialization of factory DVD data.
NOTE: Do not use this for normal servicing.
Set Key
VOL. DOWN
(Minimum)
Remocon
Key
0 2 sec.
VOL. DOWN
(Minimum)
1 2 sec.
Standard
Time
VOL. DOWN
(Minimum)
4 2 sec.
Set
Condition
TV mode
DVD mode
(No disc)
TV mode
STOP 7 2 sec.
VOL. DOWN
(Minimum)
6 2 sec.
VOL. DOWN
(Minimum)
9 2 sec.
DVD mode
(No disc)
TV mode
ALL mode
Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
Adjustment).
Releasing of PARENTAL LOCK.
Refer to the “PARENTAL CONTROL - RATING LEVEL”.
5 2 sec.
DVD Write mode.
Refer to the “RE-WRITE FOR DVD FIRMWARE”.
VOL. DOWN
(Minimum)
DVD mode
(No disc)
VOL. DOWN
(Minimum)
2 sec.
TV mode
8
DVD
Refer to the “RE-WRITE FOR DVD FIRMWARE”.STOP 1 2 sec.
DVD mode
(No disc)
C-1