Specifications
–99–
3-1. Digital multi effects/switcher systems
DFS-700P
DME Switcher
•Video switcher equipped with powerful digital multi effector
•Full digital component processing from input to output at
4:2:2:4 (video and key) •No need for external A/D converters
•Incorporates thousands of factory preset effect patterns
including non-linear digital effects •The perfect companion
for Sony digital VTRs and servers •Real-time system,
capable of delivering effects in an instant •Eight standard
inputs include four SDIs and four analog components •Eight
standard outputs include two SDIs, two analog components,
two analog composites, and two Y/Cs •Can be used with
Sony BVE-2000/P and PVE-500/P editors via the serial
interface •Optional boards are prepared to change the types
of inputs (BKDF-701/702P) •Chroma keyer, Y/U/V color
correction, down stream keyer, fade-to-black, and frame
memory are included •2nd channel DME board prepared as
an option (BKDF-711) •3D video mapping effects board
prepared as an option (BKDF-712)
Optional Accessories
BKDF-701 Digital/Analog Input Board for NTSC/PAL
BKDF-702P Analog Composite Input Board for PAL
BKDF-711 2nd Channel DME Board
BKDF-712 3D Video Mapping Effects Board
Specifications
General
Power requirements: AC 220/240 V, 50/60 Hz
Operating voltage: AC 180 to 260 V, 47 to 63 Hz
Power consumption: 200 W
Operating temperature: 0 to 40 °C (32 to 104 °F)
Dimensions: Control panel: 440 (W) × 121 (H) × 287 (D) mm
17
1
⁄4 × 4
3
⁄4 × 11
1
⁄4 inches
Processor unit: 440 × 132 × 520 mm
17
1
⁄4 × 5
1
⁄4 × 20
1
⁄2 inches
Mass: Control panel: 3 kg, 6 lb 10 oz
Processor unit: 14 kg, 30 lb 14 oz
Input Signals
VIDEO INPUTS
SDI: BNC type x 4
270 Mb/s
Component: BNC type x 4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.525 Vp-p, 75 Ω
DSK KEY IN: BNC type x 2, Loop-through, 1.0 Vp-p, 75 Ω
REF VIDEO: BNC type x 2, Loop-through connection
Sync: 0.3 Vp-p
Burst: 0.3 Vp-p
Output Signals
PGM OUT
SDI: BNC type x 2
270 Mb/s
Component: BNC type x 2 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.525 Vp-p, 75 Ω
Composite: BNC type x 2
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video: DIN type x 2 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.3 Vp-p at burst, 75 Ω
CLEAN OUT: BNC type x 1
SDI: 270 Mb/s
PREVIEW OUT: BNC type x 1, Composite
Video: 1.0 Vp-p, 75 , Sync negative
BLACK BURST OUT: BNC type x 3
Sync: 0.3 Vp-p, 75 Ω
Burst: 0.3 Vp-p, 75 Ω
Signal Processing
Sampling rate: Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization: Y/R-Y/B-Y: 8 bits
Linearity (Composite output):
DG: Less than 3.5% (composite input)
Less than 2% (component, S-Video input)
DP: Less than 2.5° (composite input)
Less than 1° (component, S-Video input)
Frequency response 0 to 5 MHz +0.5 dB/-1 dB
NON-LINEAR/
EDITOR/DME/
SWITCHER
S/N More than 50 dB (composite)
More than 55 dB (component, S-Video)
Y/C delay Less than 20 ns (component)
Less than 50 ns (composite, S-Video)
Control Signals
Editor D-sub 9 pin x 1, RS-422A
GPI/T BNC type x 2, TTL Level
Panel D-sub 25-pin x 1
Tally D-sub 25-pin x 1, Relay contact outputs x 8
Terminal USB B-type
BKDF-701
With the BKDF-701, the following 8 inputs can be added to
the standard 8 inputs of the DFS-700/P, making the total
number of inputs 16. During use, any 8 of the 16 inputs can
be assigned to the control panel.
Input Signals
SDI: BNC type x 4
270 Mb/s
Component: BNC type x 4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.525 Vp-p, 75 Ω
BKDF-702P
With the BKDF-702P, the following 4 inputs (composite or
S-Video) can be added to the standard 8 inputs of the
DFS-700P, making the total number of inputs 12. During use,
any 8 of the 12 inputs can be assigned to the control panel.
Input Signals
Composite: BNC type x 4
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video: DIN type x 4 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.3 Vp-p at burst, 75 Ω