Specifications

–100–
3-1. Digital multi effects/switcher systems
NON-LINEAR/ EDITOR/DME/
SWITCHER
DFS-500P
DME switcher
•Video switcher equipped with powerful digital multi effector
•More than 300 factory preset effect patterns including
non-linear digital effects •Up to 40 manually created effect
patterns can be stored in the User Programme memory
system for subsequent recall •Built-in two frame synchronizer
accept non time base corrected video signals •4:1:1 digital
component processing realizes high picture quality •Accepts
component, composite and S-VIDEO signals to be
processed simultaneously •Composed of 2 busses and 4
primary inputs •15 original background patterns •Up to 99
panel status storage in the Snap Shot memory system
•Equipped with 5 individual colour matte generators •Built-in
title keyer •Equipped with fader lever to allow manual picture
transition •Perfect interface capabilities with BVE-3000P
Series •Simple A/B roll editing system with PVE-500
•Modular design composed of a control panel and a
processor unit •Down stream keyer function available with
optional board •Lighting, trail, shadow and drop border
effects are available with optional board
Typical preset patterns
mosaic, mirror, negative, solarization, posterization
picture in picture, ripple wipe, sphere, page turn, page roll, split, slide,
melt down, stream, flag
Supplied accessories: AC power cord
25-pin control cable, 10 m
Label 1 set
Operation Manual
Optional accessories: BKDF-501P Trail and lighting board
Provides drop border, shadow, trail and lighting
effects.
BKDF-504P DSK board
Provides 8bit down stream keyer.
BKDF-503 Rack mount kit
Enables the control panel to be mounted onto
the editing console.
Specifications
General
Power requirements: AC 220/240V, 50/60Hz
Operating voltage: AC 180 to 264V, 48 to 63Hz
Power consumption: 140W
Operating temperature: 0 to 40°C (32 to 104°F)
Dimensions: Control Panel: 424 (W) × 116 (H) × 344 (D) mm
(16
3
⁄4 × 4
5
⁄8 × 13
5
⁄8 inches)
Processor Unit: 424 (W) × 177 (H) × 450 (D) mm
(16
3
⁄4 × 7 × 17
3
⁄4 inches)
Mass: Control Panel: 3 kg (6 lb 10 oz)
Processor Unit: 17 kg (35 lb 4 oz)
Input Signals
VIDEO INPUTS 1 through 4
Composite: BNC type (1 in each)
VIDEO: 1.0Vp-p, 75Ω
SYNC: 0.3Vp-p
BURST: 0.3Vp-p
Y/C: 4-pin (1 in each)
Y: 1.0Vp-p, 75Ω
C: 0.3Vp-p, 75Ω
SYNC: 0.3Vp-p
Component: 12-pin (1 in each)
Y: 1.0Vp-p, 75Ω
R-Y/B-Y: 0.525Vp-p, 75Ω
DSK VIDEO IN
Composite/G/Y: BNC type
Composite: VIDEO 1.0Vp-p, 75Ω
SYNC 0.3Vp-p
BURST 0.3Vp-p
Y: 1.0Vp-p, 75Ω
G: 0.7Vp-p, 75Ω
B/B-Y: BNC type
B-Y: 0.525Vp-p, 75Ω
B: 0.7Vp-p, 75Ω
R/R-Y: BNC type
R-Y: 0.525Vp-p, 75Ω
R: 0.7Vp-p, 75Ω
EXT KEY IN: BNC type 1.0Vp-p, 75Ω
DSK KEY IN: BNC type 1.0Vp-p, 75Ω
GEN LOCK IN: BNC type
Sync: 0.3Vp-p
Burst : 0.3Vp-p
Output Signals
PGM OUT 1 and 2
Composite: BNC type
VIDEO: 1.0Vp-p, 75Ω
SYNC: 0.3Vp-p
BURST: 0.3Vp-p
Y/C: 4-pin
Y: 1.0Vp-p, 75Ω
C: 0.3Vp-p, 75Ω
SYNC: 0.3Vp-p
Component: 12-pin
Y: 1.0Vp-p, 75Ω
R-Y/B-Y: 0.525Vp-p, 75Ω
KEY OUT: BNC type: 1.0Vp-p, 75Ω
BLACK BURST OUT: BNC type
SYNC: 0.3Vp-p, 75Ω
BURST: 0.3Vp-p, 75Ω
Signal Processing
Sampling Rate: Y: 908fH (fH : 15.625 kHz)
R-Y/B-Y: 1/4 × 908fH
Quantization: Y/R-Y/B-Y: 8 bits
Linearity (Composite output):
DG: Less than 3.5% composite input
Less than 2% component/S input
DP: Less than 2.5°composite input
Less than 1° component/S input
Cross talk: Less than -50dB
Frequency response: 0 to 5 MHz +0.5dB/–1dB
S/N: More than 51dB (composite)
More than 55dB (Y/C, component)
Y/C delay: Less than 20ns (component)
Less than 50ns (composite)
Control Signals
Editor: 9-pin remote
T1/T2, cue: BNC type
Control Panel: 25-pin remote
Rear Panel of Processor