Specifications

–101–
3-1. Digital multi effects/switcher systems
NON-LINEAR/ EDITOR/DME/
SWITCHER
DFS-300P
DME switcher
•Video switcher equipped with powerful digital multi effector
•More than 300 factory preset effect patterns including
2D digital effects •With the optional board BKDF-301P,
3D linear and non linear factory preset effect patterns can
be added •Up to 20 manually created effect patterns can be
stored in the User Programme memory system for
subsequent recall •With the optional board BKDF-301P, up
to 40 effect patterns can be manually created and stored in
the User Programme memory system •Built-in two frame
synchronizers accept non time base corrected video signals
•4:1:1 digital component processing realizes high picture
quality •Accepts component, composite and S-video signals
•Accepts RGB signals for graphic image data processing
•Composed of two busses and four primary inputs • 31
original background patterns
•Up to 99 snapshots can be
stored in the Snap Shot memory system •Equipped with five
individual colour matte generator
•Built-in chromakeyer, title
keyer and colour correction controller •Equipped with fader
lever to allow manual picture transition •Provides simple A/B
roll or two machine editing system with PVE-500 •Modular
design composed of a control panel and a processor unit •8-
bit Down Stream Keyer function available with optional
board BKDF-504P •3D and non-linear effects are available
with optional board BKDF-301P
Typical preset patterns
mosaic, mirror, negative, solarization, posterization, split, slide, melt down,
stream, etc
Supplied accessories: AC power cable
25-pin control cable (10m)
Operation manual
Optional accessories: BKDF-301P 3D effect board
Provides 3D effect, non-linear effect
BKDF-503 Rack mount kit
BKDF-504P DSK board
Specifications
General
Power requirements: AC220V or 240V, 50/60Hz
Operating Voltage: AC180 to 264V, 48 to 63Hz
Power consumption: 80W
Operating temperature: 0 to 40˚C (32 to 104˚F)
Dimensions: Control panel: 424 (W) × 69 (H) × 287 (D) mm
(16
3
⁄4 × 2
3
⁄4 × 11
3
⁄8 inches)
Processor: 424 (W) × 132 (H) × 450 (D) mm
(16
3
⁄4 × 5
1
⁄4 × 17
3
⁄4 inches)
Mass: Control panel: 2.3 kg (5 lb 1 oz)
Processor: 13.0 kg (28 lb 10 oz)
Inputs/Outputs
Primary video inputs 1 to 3/Programme video outputs:
Composite Connector: BNC type (× 1, each)
Video: 1.0Vp-p, 75Ω
Sync: 0.3Vp-p
Burst: 0.3Vp-p
S-video (Y/C) Connector: DIN-4-pin (× 1, each)
Y: 1.0Vp-p, 75Ω
C: 0.3Vp-p, 75Ω, burst
Sync:0.3Vp-p
Component (Betacam)
Connector: 12-pin (× 1, each)
Y: 1.0Vp-p, 75Ω
R-Y/B-Y: 0.525Vp-p
Primary video inputs 4:
Y/G Connector: BNC type
Y: 1.0Vp-p, 75Ω
G: 0.7Vp-p, 75Ω
R-Y/R Connector: BNC type
R-Y: 0.525Vp-p, 75Ω
R: 0.7Vp-p, 75Ω
B-Y/B Connector: BNC type
B-Y: 0.525Vp-p, 75Ω
B: 0.7Vp-p, 75Ω
Sync Connector: BNC type
0.3 to 4.0Vp-p, 75Ω
DSK Video Inputs:
Composite/G/Y (PAL)
Connector: BNC type (× 2, loop-through)
Video: 1.0Vp-p, 75Ω
Sync: 0.3Vp-p
Burst: 0.3Vp-p
Y: 1.0Vp-p, 75Ω
G: 0.7Vp-p, 75Ω
B/B-Y Connector: BNC type
B-Y: 0.525Vp-p
B: 0.7Vp-p, 75Ω
R/R-Y Connector: BNC type
R-Y: 0.525Vp-p
R: 0.7Vp-p, 75Ω
EXT KEY IN/DSK KEY IN/KEY OUT:
Connector: BNC type (× 1, each)
1.0Vp-p, 75Ω
GEN LOCK IN: Connector: BNC type (× 2, loop-through)
Video: 1.0Vp-p, 75Ω
Sync: 0.3Vp-p
Burst: 0.3Vp-p
BLACK BURST OUT 1 to 3:
Connector: BNC type (× 3)
Sync: 0.3Vp-p (75Ω)
Burst: 0.3Vp-p (75Ω)
Signal Processing
Frequency response: 0 to 5MHz (Ref. 1MHz) +0.5dB/–1dB
Linearity: DG 3.5% (composite input)
2.0% (component/S input)
DP 2.5˚ (composite input)
1.0˚ (component/S input)
Crosstalk: –50dB
S/N: 51dB (composite)
55dB (Y/C, component)
Y/C delay: Less than 20ns (component)
Less than 50ns (composite)
Sampling rate: Y: 908fH (fH: 15.625kHz)
R-Y/B-Y: 1/4 × 908fH
Quantization: Y/R-Y/B-Y: 8 bits
Control Signals
EDITOR: D-sub 9-pin, 9-pin remote (RS-422A)
T1/CUE IN/T2 IN: BNC type (× 1, each), TTL level
CONTROL PANEL: D-sub 25-pin, 25-pin rermote (RS-422A)
Rear Panel of Processor