Specifications

1-1 Colour video monitors
–113–
PVM-20M2E (PAL/NTSC/SECAM/NTSC4.43)
Colour Video Monitor
•High resolution of 600 TV lines with dark tint CRT for high
contrast image reproduction •Accepts component
(Y/R-Y/B-Y), RGB, Y/C and composite signals •Beam current
feedback circuit for stability in the colour balance •Optional
component serial digital interface kits BKM-101C (video)/102
(audio) available •Switchable aspect ratio (4:3 and 16:9)
•Colour temperature D65, D93 or user preset (3200K to
10000K) selectable •On-screen display for
adjustment/operation •User preset function •Underscan, Blue
Only and H/V delay mode available •Auto chroma/phase
setup*
1
•Accepts external sync •Auto/Manual degaussing
•Mountable into an EIA standard rack with the optional
SLR-103A
Supplied accessories: 20-pin remote cable
Tally label
AC cord
AC plug holder
Operation manual
Optional accessories: BKM-101C (Component serial digital interface kit
(video))
BKM-102 (Component serial digital interface kit
(audio))
BKM-103 (Serial remote control kit for RS-422)
SLR-103A (Slide rail)
TU-1040E (Tuner unit)
Specifications
CRT
AG pitch: 0.4 mm
Phosphor: P-22
CRT size: 53.3 cm (20-inch) diagonally
Visible picture size: 48.0 cm (19-inch) diagonally
Resolution: 600TV lines
Colour system: PAL, NTSC, SECAM, NTSC
4.43*
2
Aperture correction: 0 to +6 dB
Frequency response: LINE: 10.0 MHz (±3 dB) *Y signal only
RGB: 10.0 MHz (±3 dB)
Synchronization: AFC time constant 1.0 mS
Normal scan: 7% over scan
Under scan: 5% under scan
Linearity: H: less than 5%
V: less than 5%
Convergence: Centre: 0.6 mm (typical)
Peripheral: 1.0 mm (typical)
Raster size stability: H: 1.0%
V: 1.5%
HV regulation: 4.0%
Colour temperature: D65, D93, USER (3200K to 10000K)
Audio out: 0.8 W (distortion: less than 5 %)
Power consumption: 120 W (with SDI: 130 W)
AC input range: AC 100 to 240 V (50/60 Hz)
Operation temperature: 0 to 35 °C
Storage temperature: -10 to 40 °C
Operating humidity: 35 to 85% (no condensation)
Storage humidity: 0 to 90%
Pressure: 880 to 1060 hPa
Dimensions: 450 (W) × 458 (H) × 503 (D) mm
(17
3
⁄4 × 18
1
⁄8 × 19
7
⁄8 inches)
Mass: 30.0 kg (66 lb 2 oz)
Inputs / Outputs
LINE A/B*
3
1.0 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*
4
LINE C*
3
Y: 1.0 Vp-p ±6 dB
C: 0.3 Vp-p ±6 dB
Loop-through Mini DIN 4-pin automatic
75 Ω termination*
4
DISPLAY
PRODUCTS
RGB / Component (selectable)*
5
R/R-Y: 0.7 Vp-p ±6 dB
G: 0.7 Vp-p ±6 dB
Sync on G: 0.3 Vp-p ±6 dB
Y: 0.7 Vp-p ±6 dB
B/B-Y: 0.7 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*
4
External Sync
4 Vp-p ±6 dB, negative
Loop-through BNC automatic 75 Ω termination*
4
Regulation Compliance:
TÜV IEC-950, CE (EMC, LVD)
*1 Phase setup is for NTSC signals only.
*2 The NTSC
4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*3 The Y/C input has priority over the Composite video input.
*4 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*5 Video amplitude 100/0/100 colour bars.