Specifications

1-1 Colour video monitors
–116–
PVM-20M7MDE(PAL)
Colour Video Monitor for medical use
•HR Trinitron CRT assures a high resolution of 550 TV
lines*
1
at 15kHz/800 TV lines at progressive scan •Adopts
EBU phosphors •100Hz double scan •Digital PAL comb filter
for accurate image reproduction •Field doubling scanning to
reduce flicker phenomena •Component (Y/R-Y/B-Y or RGB)
input facility •On-screen display in multiple language for
adjustment/operation •6500K/5600K/User preset colour
temperature selectable •Accepts external sync •RS-232C
serial remote control capability •Remote/tally input •Power
saving function is available •Mountable into a 19-inch EIA
standard rack with optional SLR-103A •White colour cabinet
with side and control panel covers •Complies with IEC-601-1
safety regulation
Supplied accessories: Side covers
Control panel cover
RS-232C interface manual
Quick reference card
AC power cord
Panel hinges
Instructions for use
Optional accessories: Slide rail kit SLR-103A
Specifications
Video signal system: CCIR 625 lines, 50 fields, interlaced
CCIR 625 lines, 50 fields, non-interlaced
Colour system: PAL
Picture tube: 53.3 cm (20-inch), HR Trinitron tube, visible picture
size 48.3 cm (min.) (19-inch) measured diagonally,
90°
deflection, EBU phosphors
Horizontal resolution: PAL (15kHz): 550 TV lines*
1
Progressive scan: 800 TV lines
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: Approx. 160 W
Dimensions: 450 (W) × 457.5 (H) × 503 (D) mm
(17
3
⁄4 × 18
1
⁄8 × 19
7
⁄8 inches)
Mass: 34 kg (74 Ib 15 oz)
VIDEO
LINE A Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*
2
LINE B Loop-through Mini DIN 4-pin
Y(luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*
2
C(chrominance):
0.3 Vp-p, Automatic 75 Ω termination*
2
RGB/Component A: Loop-through BNC
R-Y/B-Y: 0.7 Vp-p, Automatic 75 Ω termination*
2
Y: 1.0 Vp-p, Automatic 75 Ω termination*
2
R/G/B: 0.7 Vp-p, Automatic 75 Ω termination*
2
Sync on G: 0.3 Vp-p, negative, Automatic 75 Ω
termination*
2
Sync: 4.0 Vp-p negative, Automatic 75 Ω
termination*
2
B:BNC
R-Y/B-Y: 0.7 Vp-p, 75 Ω
Y: 1.0 Vp-p, 75 Ω
R/G/B: 0.7 Vp-p, 75 Ω
Sync on G: 0.3 Vp-p, negative, 75 Ω
Sync: 4.0 Vp-p negative, 75 Ω
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Loop-through Phono
-5 dBu, high impedance
RGB/Component A: Loop-through Phono
-5 dBu, high impedance
B: Phono
-5 dBu, high impedance
DISPLAY
PRODUCTS
*1 Maximum resolution of the field doubling digital device circuit.
*2 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.