Specifications

1-1 Colour video monitors
–119–
PVM-14M2E/14M2A*
1
(PAL/NTSC/SECAM/NTSC
4.43)
Colour Video Monitor
•High resolution of 600 TV lines with dark tint CRT for high
contrast image reproduction •Accepts component
(Y/R-Y/B-Y), RGB, Y/C and composite signals •Beam current
feedback circuit for stability in the colour balance •Optional
component serial digital interface kits BKM-101C (video)/102
(audio) available •Switchable aspect ratio (4:3 and 16:9)
•Colour temperature D65, D93 or user preset (3200K to
10000K) selectable •On-screen display for adjustment/
operation •User preset function •Underscan, Blue Only and
H/V delay mode available •Auto chroma/phase setup*
2
•Accepts external sync •Auto/Manual degaussing •Mountable
into an EIA standard rack with the optional MB-502B and
SLR-102
Supplied accessories: 20-pin remote cable
Tally label
AC cord
AC plug holder
Operation manual
Optional accessories: BKM-101C (Component serial digital interface kit
(video))
BKM-102 (Component serial digital interface kit
(audio))
BKM-103 (Serial remote control kit for RS-422)
MB-502B (Rack mounting bracket)
SLR-102 (Slide rail)
TU-1040E (Tuner unit)
Specifications
CRT
AG pitch: 0.25 mm
Phosphor: P-22
CRT size: 37.1 cm (14-inch) diagonally
Visible picture size: 33.2 cm (13-inch) diagonally
Resolution: 600 TV lines
Colour system: PAL, NTSC, SECAM, NTSC
4.43*
3
Aperture correction: 0 to +6 dB
Frequency response: LINE: 10.0 MHz (±3 dB) *Y signal only
RGB: 10.0 MHz (±3 dB)
Synchronization: AFC time constant 1.0 mS
Normal scan: 7% over scan
Under scan: 5% under scan
Linearity: H: less than 4%
V: less than 4%
Convergence: Centre: 0.4 mm (typical)
Peripheral: 0.5 mm (typical)
Raster size stability: H: 1.0%
V: 1.5%
HV regulation: 3.5%
Colour temperature: D65, D93, USER (3200K to 10000K)
Audio out: 0.8 W (distortion: less than 5%)
Power consumption: 90 W (with SDI: 99 W)
AC input range: AC 100 to 240 V (50/60 Hz)
Operation temperature: 0 to 35 °C
Storage temperature: -10 to 40 °C
Operating humidity: 35 to 85% (no condensation)
Storage humidity: 0 to 90%
Pressure: 880 to 1060 hPa
Dimensions: 346 (W) × 340 (H) × 431 (D) mm
(13
5
⁄8 × 13
1
⁄2 × 17 inches)
Mass: 16.7 kg (36 lb 13 oz)
Inputs / Outputs
LINE A/B*
4
1.0 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*
5
LINE C*
4
Y: 1.0 Vp-p ±6 dB
C: 0.3 Vp-p ±6 dB
Loop-through Mini DIN 4-pin automatic
75 Ω termination*
5
DISPLAY
PRODUCTS
RGB / Component (selectable)*
6
R/R-Y: 0.7 Vp-p ±6 dB
G: 0.7 Vp-p ±6 dB
Sync on G: 0.3 Vp-p ±6 dB
Y: 0.7 Vp-p ±6 dB
B/B-Y: 0.7 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*
5
External Sync
4.0 Vp-p ±6 dB, negative
Loop-through BNC automatic 75 Ω termination*
5
Regulation Compliance:
TÜV IEC-950, CE (EMC, LVD)
C-Tick (for PVM-14M2A)
*1 PVM-14M2A is an Australian version.
*2 Phase setup is for NTSC signals only.
*3 The NTSC
4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*4 The Y/C input has priority over the Composite video input.
*5 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*6 Video amplitude 100/0/100 colour bars.