Specifications

1-1 Colour video monitors
–120–
PVM-14N6E/14N6A*
1
(PAL/NTSC/SECAM/NTSC4.43)
Colour Video Monitor
•Resolution of 500 TV lines •Beam current feedback circuit
for stability in the colour balance •Accepts composite video,
Y/C and RGB signals •Switchable aspect ratio (4:3 and 16:9)
•On-screen menu for adjustment/operation •Input channel
can be selected via REMOTE terminal (Phono) •Built-in
speaker •One touch recall of last menu used (VOLUME,
CONTRAST, BRIGHTNESS, CHROMA and PHASE)
•Mountable into a 19-inch EIA standard rack with the optional
MB-502 and SLR-102
Optional accessories: Rack mounting bracket kit MB-502B
Slide rail kit (used with the MB-502B) SLR-102
Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC
4.43*
2
Picture tube: 37.1 cm (14-inch), visible picture size 33.2 cm (min.)
(13-inch) measured diagonally, 90°
deflection
Horizontal resolution: 500 TV lines at centre
Audio power output: Monaural, 0.8 W with built-in speaker
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: 80 W
Dimensions: 346 (W) × 340 (H) × 414 (D) mm
(13
5
⁄8 × 13
3
⁄8 × 16
5
⁄16 inches)
Mass: 15 kg (33 lb 1 oz)
VIDEO
LINE A*
3
Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*
4
Loop-through Mini DIN 4-pin
Y(luminance):
1.0 Vp-p, sync negative, Automatic 75 Ω
termination*
4
C(chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*
4
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*
4
LINE B*
3
BNC
1.0 Vp-p, sync negative, 75 Ω
Mini DIN 4-pin
Y: 1.0 Vp-p, sync negative, 75 Ω
C: PAL: 0.3 Vp-p, sync negative, 75 Ω
NTSC: 0.286 Vp-p, 75 Ω
RGB/Sync BNC
R/G/B: 0.7 Vp-p, 75 Ω
Sync on G: 0.3 Vp-p, 75 Ω
Sync: 4.0 Vp-p, 75 Ω
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Phono
-5 dBu, high impedance
RGB/Sync Phono
-5 dBu, high impedance
DISPLAY
PRODUCTS
*1 PVM-14N6A is an Australian version.
*2 The NTSC
4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*3 The Y/C input has priority over the Compsite video input.
*4 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.