Specifications

1-1 Colour video monitors
–123–
PVM-14N5MDE (PAL/NTSC/SECAM/NTSC 4.43 )
Colour Video Monitor for medical use
•High resolution of 500 TV lines with Sony Trinitron
®
CRT
•Stable colour reproduction with Beam Current Feedback
Circuit •Loop-through Y/C and composite video inputs
•Complies with world-wide EN 60 601-1, UL 2601-1 and CSA
601.1 safety regulations •Ground earth terminal for safety
•Supplied with side covers •Accepts PAL, NTSC, SECAM
and NTSC
4.43 signals •On-screen menu with a choice of five
languages to facilitate monitor adjustment/setting •Built-in
speaker for audio monitoring
Supplied accessories: AC power cord (1)
Side covers (2)
Instructions for use (1)
Optional accessories: Rack mounting bracket kit MB-502B
Slide rail kit (used with the MB-502B) SLR-102
Specifications
General
System: PAL/NTSC/SECAM/NTSC
4.43 automatically selected
Power requirements: 100 to 240 V, 50/60 Hz
Power consumption: 80 W
Dimensions: 346 (W) × 340 (H) × 414 (D) mm
(13
5
⁄8 × 13
3
⁄8 × 16
5
⁄16 inches)
Mass: 15 kg (33 lb 1 oz)
Operating temperature: 0 to 40 °C (32 to 104 °F)
Storage temperature: -10 to 40 °C (14 to 104 °F)
Operating humidity: 30 to 85% (no condensation)
CRT Performance
CRT type: 370 mm (14-inch) Trinitron CRT with P-22 phosphors,
visible picture size 332 mm (13-inch) (min.) measured
diagonally
Resolution: 500 TV lines
Colour temperature: D65
Picture performance
Normal scan: 7% overscan
Linearity: H: less than 8%
V: less than 7%
Input performance
Video
LINE A*
1
Composite: Loop-through BNC 1.0 Vp-p +3 dB -6 dB,
sync negative automatic 75 Ω
termination*
2
Y/C*
1
: Loop-through 4-pin mini DIN
Y: 1.0 V p-p +3 dB -6 dB, sync negative
automatic 75 Ω termination*
2
C: 0.3 Vp-p (PAL) or 0.286 Vp-p (NTSC),
automatic 75 Ω termination*
2
LINE B*
1
Composite: BNC 1.0 Vp-p +3 dB -6 dB, sync
negative, 75 Ω
Y/C*
1
: 4-pin mini DIN
Y: 1.0 Vp-p +3 dB -6 dB,
sync negative, 75 Ω
C: 0.3 Vp-p (PAL) or
0.286 Vp-p (NTSC), 75 Ω
Frequency response: 6 MHz (±3 dB)
Audio
LINE A Loop-through phono -5 dBu, high impedance
LINE B Phono -5 dBu, high impedance
0 dBu=0.775 V rms
DISPLAY
PRODUCTS
*1 Y/C input has priority over composite input.
*2 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.