Specifications

1-1 Colour video monitors
–124–
PVM-9045QM(PAL/NTSC/SECAM/NTSC4.43)
For picture evaluation in studio, ENG/EFP
applications
•Aspect ratio is switchable (4:3 and 16:9) with the 16:9 button
on the front panel •High resolution CRT provides 450 TV
lines at centre (composite video) •Stable colour temperature
from beam current feedback circuit •Analogue component
level selectable between BETA and N10/SMPTE by a rear
panel slide switch •NTSC comb filter •Accepts external
sync/sync on Green •Tally input •Colour temperature D65
•Blue only, H/V delay, Underscan capability •Built-in speaker
and monitoring amplifier •AC/DC operation •Front panel
degauss button •EIA standard rack mountable with a second
PVM-9045QM (or an optional blank panel MB-509) by using
an optional MB-507 rack mounting bracket
Supplied accessories: AC power cord, Mini DIN 8-pin connector with cable
(cable length 350 mm, 13
7
⁄8 inches),
Tally number plates (12 pcs: No.1 to 5, A, B, C, P, R,
white × 2 pcs), Operation manual
Optional accessories: TV tuner unit TU-1040E
Monitor ENG kit VF-505 (Monitor hood and cord reel)
Rack mounting bracket MB-507
Blank panel MB-509
Battery adaptor DC-L10
Rechargeable lithium-ion battery BP-L60A
Rechargeable lithium-ion battery BP-L90A
Rechargeable battery pack NP-1B
Rechargeable battery pack BP-90A
Battery case (for BP-90A battery) DC-210
Battery charger (for two BP-L60A or BP-L90A
batteries) BC-L50
Battery charger (for four BP-L60A or BP-L90A
batteries) BC-L100CE
Battery charger (for four NP-1B batteries)
BC-1WDCE
Battery charger (for four NP-1B and four BP-90A
batteries) BC-410CE
Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC
4.43*
1
(automatically selected)
Picture tube: 22 cm (9-inch) HR Trinitron tube,
visible picture size 19.7 cm (8-inch) measured
diagonally, 70° deflection
Horizontal resolution: 450 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC: 100 to 240 V 0.7 to 0.4 A, 50/60 Hz
DC: 12 V 3.7 A
Power consumption: AC: 43 W
DC: 40 W
Dimensions: 217 (W) × 217 (H) × 352.5 (D) mm
(8
5
⁄8 × 8
5
⁄8 × 14 inches)
Mass: 8.2 kg (18 lb)
VIDEO
LINE A
Composite*
2
: Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75 Ω termination*
3
Y/C*
2
: Loop-through Mini DIN 4-pin
Y (luminance): 1.0 Vp-p, sync negative,
Automatic 75 Ω termination*
3
C (chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*
3
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*
3
LINE B
Composite: Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75 Ω termination*
3
RGB/Component*
4
BNC
R/R-Y: Non-composite: 0.7 Vp-p, 75 Ω
Sync on Green/G/Y: Composite: 1.0 Vp-p, sync negative, 75 Ω
Non-composite: 0.7 Vp-p, 75 Ω
B/B-Y: Non-composite: 0.7 Vp-p, 75 Ω
DISPLAY
PRODUCTS
External sync Loop-through BNC
4.0 Vp-p negative, Automatic 75 Ω termination*
3
Tally Mini DIN 8-pin
DC XLR 4-pin
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Loop-through Phono
-5 dBu, high impedance
RGB/Component Phono
-5 dBu, high impedance
*1 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*2 The Y/C input has priority over the Composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*4 Video amplitude 100/0/100 colour bars.