Specifications

1-1 Colour video monitors
–126–
PVM-9042QM(PAL/NTSC/SECAM/NTSC4.43)
For multi-purpose use in various applications
•Aspect ratio is switchable (4:3 and 16:9) with the 16:9 button
on the front panel •Stable colour temperature from beam
current feedback circuit •Analogue component level
selectable between BETA and N10/SMPTE by a rear panel
slide switch •NTSC comb filter •Accepts external sync/sync
on Green •Tally input •Colour temperature D65 •Blue only,
H/V delay, Underscan capability •Built-in speaker and
monitoring amplifier •AC/DC operation •Front panel degauss
button •EIA standard rack mountable with a second
PVM-9042QM (or an optional blank panel MB-509) by using
an optional MB-507 rack mounting bracket
Supplied accessories: AC power cord, Mini DIN 8-pin connector with cable
(cable length 350 mm, 13
7
⁄8 inches),
Tally number
plates (12 pcs: No.1 to 5, A, B, C, P, R,
white × 2 pcs),
Operation manual
Optional accessories: TV tuner unit TU-1040E
Monitor ENG kit VF-505 (Monitor hood and cord reel)
Rack mounting bracket MB-507
Blank panel MB-509
Battery adaptor DC-L10
Rechargeable lithium-ion battery BP-L60A
Rechargeable lithium-ion battery BP-L90A
Rechargeable battery pack NP-1B
Rechargeable battery pack BP-90A
Battery case (for BP-90A battery) DC-210
Battery charger (for two BP-L60A or BP-L90A
batteries) BC-L50
Battery charger (for four BP-L60A or BP-L90A
batteries) BC-L100CE
Battery charger (for four NP-1B batteries)
BC-1WDCE
Battery charger (for four NP-1B and four BP-90A
batteries) BC-410CE
Specifications
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC
4.43*
1
(automatically selected)
Picture tube: 22 cm (9-inch) Trinitron tube, visible picture
size 19.7 cm (8-inch) measured diagonally,
70° deflection
Horizontal resolution: 250 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC: 100 to 240 V 0.7 to 0.4 A, 50/60 Hz
DC: 12 V 3.7 A
Power consumption: AC: 43 W
DC: 40 W
Dimensions: 217 (W) × 217 (H) × 352.5 (D) mm
(8
5
⁄8 × 8
5
⁄8 × 14 inches)
Mass: 8.2 kg (18 lb)
VIDEO
LINE A
Composite*
2
: Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*
3
Y/C*
2
: Loop-through Mini DIN 4-pin
Y(luminance): 1.0 Vp-p, sync negative,
Automatic 75 Ω termination*
3
C(chrominance):
PAL: 0.3 Vp-p, Automatic 75 Ω termination*
3
NTSC: 0.286 Vp-p, Automatic 75 Ω termination*
3
LINE B
Composite: Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*
3
RGB/Component*
4
4
BNC
R/R-Y: Non-composite: 0.7 Vp-p, 75 Ω
Sync on Green/G/Y: Composite: 1.0 Vp-p, sync negative, 75 Ω
Non-composite: 0.7 Vp-p, 75 Ω
B/B-Y: Non-composite: 0.7 Vp-p, 75 Ω
DISPLAY
PRODUCTS
External sync Loop-through BNC
4.0 Vp-p negative, Automatic 75 Ω termination*
3
Tally Mini DIN 8-pin
DC INPUT XLR 4-pin
AUDIO
LINE A Loop-through Phono
-5 dBu, high impedance
LINE B Loop-through Phono
-5 dBu, high impedance
RGB/Component Phono
-5 dBu, high impedance
*1 The NTSC4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*2 The Y/C input has priority over the Composite video input.
*3 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*4 Video amplitude 100/0/100 colour bars.