Specifications

1-1 Colour video monitors
–127–
PVM-9040ME(PAL/SECAM)
Basic monitoring device
•Employs a beam current feedback circuit for stability in the
colour balance •Composite video or Y/C input with audio
input •Built-in speaker •19-inch EIA standard rack
mountable with a second PVM-9040ME or the optional blank
panel MB-509 by using the optional MB-507 rack mounting
bracket
Supplied accessories: AC power cord, Operation manual
Optional accessories: TV tuner unit TU-1040E
Rack mounting bracket MB-507
Blank panel MB-509
Composite digital monitor interface DMIF-2000
Specifications
Video signal system: CCIR 625 lines, 50 fields
Colour system: PAL/SECAM (automatically selected)
Picture tube: 22 cm (9-inch) Trinitron tube, visible picture
size 19.7 cm (8-inch) measured diagonally,
70° deflection
Horizontal resolution: 250 TV lines at centre
Audio power output: Monaural, 0.5 W with built-in speaker
Power requirements: AC: 100 to 240 V 0.7 to 0.4 A, 50/60 Hz
Power consumption: 39 W
Dimensions: 217 (W) × 217 (H) × 352.5 (D) mm
(8
5
⁄8 × 8
5
⁄8 × 14 inches)
Mass: 7.5 kg (16 lb 9.5 oz)
VIDEO
LINE
Composite*
1
: Loop-through BNC
1.0 Vp-p, sync negative,
Automatic 75 Ω termination*
2
Y/C*
1
: Loop-through Mini DIN 4-pin
Y(luminance): 1.0 Vp-p, sync negative,
Automatic 75 Ω termination*
2
C(chrominance):
0.3 Vp-p, Automatic 75 Ω termination*
2
AUDIO
LINE Loop-through Phono
-5 dBu, high impedance
DISPLAY
PRODUCTS
*1 The Y/C input has priority over the Composite video input.
*2 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.