Specifications

1-1 Colour video monitors
–130–
PVM-20S1WE/20S1WA*
1
(PAL/NTSC/SECAM/NTSC4.43)
Colour Video Monitor with 16:9 aspect ratio
•16:9 aspect ratio CRT with dark panel for high contrast
image reproduction •Accepts component (Y/R-Y/B-Y), RGB,
Y/C and composite signals •Beam current feedback circuit
for stability in the colour balance •Optional component serial
digital interface kits BKM-101C (video) / 102 (audio)
available •Switchable aspect ratio (4:3 and 16:9) •Colour
temperature D65, D93 or user preset (3200K to 10000K)
selectable •On-screen display for adjustment/operation •User
preset function •Underscan, Blue Only and H/V delay mode
available •Auto chroma/phase setup*
2
•Accepts external sync
•Digital 3-line comb filter •Auto/Manual degaussing
•Mountable into an EIA standard rack with the optional
SLR-103 slide rail kit
Supplied accessories: 20-pin remote cable
Tally label
AC power cord
AC plug holder
Blind panel kit for SLR-103A*
3
Operation manual
Optional accessories: BKM-101C (component serial digital interface kit
(video))
BKM-102 (component serial digital interface kit
(audio))
BKM-103 (serial remote control kit for RS-422A)
SLR-103A (slide rail)
Specifications
CRT:
AG pitch: Variable pitch 0.65 to 0.75 mm
Phosphor: P-22
Visible screen size: 46 cm (18-inch) diagonally
Resolution: 300 TV lines
Colour system: PAL, NTSC, SECAM, NTSC
4.43*
4
Aperture correction: 0 to +6 dB
Frequency response:
LINE: 6 MHz (±3 dB) *Y signal only
RGB: 6 MHz (±3 dB)
Synchronization: AFC time constant 1.0 mS
Normal scan: 7% over scan
Under scan: 5% under scan
Linearity:
H: less than 8% (typical)
V: less than 7% (typical)
Convergence:
Centre: 0.6 mm (typical)
Peripheral: 1.2 mm (typical)
Raster size stability:
H: 1.0%
V: 1.5%
HV regulation: 4.0%
Colour temperature: D65, D93, USER (3200K to 10000K)
Speaker out: 0.8 W (distortion: less than 5%)
Power consumption: 100 W (with SDI: 110 W)
AC input range: AC 220 to 240 V (50/60 Hz)
Operation temperature: 0 to 35 °C
Storage temperature: -10 to 40 °C
Operation humidity: 35 to 85% (no condensation)
Storage humidity: 0 to 90%
Dimensions: 482 (W) × 397 (H) × 503 (D) mm
19 × 15
3
⁄4 × 19
7
⁄8 inches
Mass: Approx. 25 kg (55 lb 2 oz)
{including SDI : 26 kg (57 lb 5 oz)}
Inputs/Outputs
Line A/B*
5
: 1.0 Vp-p±6 dB
Loop-through BNC automatic 75 Ω termination*
6
Line C*
5
:
Y: 1.0 Vp-p ±6 dB
C(NTSC): 0.286 Vp-p ±6 dB
Loop-through Mini DIN 4-pin automatic 75 Ω
termination*
6
DISPLAY
PRODUCTS
RGB/Component (selectable):*
7
R/R-Y: 0.7 Vp-p ±6 dB
G: 0.7 Vp-p ±6 dB
Sync on G: 0.3 Vp-p ±6 dB
Y: 1.0 Vp-p ±6 dB
B/B-Y: 0.7 Vp-p ±6 dB
Loop-through BNC automatic 75 Ω termination*
6
External sync: 4.0 Vp-p ±6 dB, negative
Loop-through BNC automatic 75 Ω termination*
6
Regulation Compliance:
PVM-20A1WE UL 1950, DHHS, FCC Class-A, CSA 22.2, No. 950,
DNHW, IC Class-A, EN60950, EN55022 Class-B,
EN50082-1, EN60555-2
PVM-20S1WA: AS/NZS 3548, AS/NZS 4252.1
*1 PVM-20S1WA is an Australian version.
*2 Phase setup is for NTSC signals only.
*3 Because the bezel protrudes from the rack when you mount the PVM-20S1WE/20S1WA, you cannot completely insert the SLR-103A.
The blind panel kit is supplied to cover the exposed part of the slide rail.
*4 The NTSC
4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*5 The Y/C input has priority over the Composite video input.
*6 75 Ω termination is automatically set to OFF when connection is made to the OUT connector.
*7 Video amplitude 100/0/100 colour bars.