Specifications

–146–
DISPLAY
PRODUCTS
2-1 Multiscan projectors
VPH-G90E/G90M*
1
(PAL/NTSC/SECAM/NTSC
4.43)
•Multiscan capability: horizontal 15 kHz to 150 kHz, vertical
35 Hz to 150 Hz •Incorporates new, high resolution 9-inch
electromagnetic focus CRTs •Incorporates a Universal
Optical Coupling •Remarkable light output of 350 ANSI lm*
2
(150 kHz: 50 Hz, 6500 K), 1300 lm (peak white), 500 lm (all
white) •High resolution of 700 TV lines (VIDEO), 1100 TV
lines (HDTV) 2500 x 2000 pixels (RGB, measured at fH: 102
kHz, fV: 50 Hz) •Wide RGB bandwidth of 135 MHz •Wider
range of registration adjustments for accurate registration
•HACC lens for superior and stable picture performance
•Video decoder circuit for enhanced video picture quality*
3
•Sony Digital Reality Creation •Responds to both
analogue/digital RGB signals •Supplied wired/wireless
remote control unit RM-PJ1001 controls all the projector
functions such as set-up adjustments and operational
functions •Various optional accessories available for system
versatility •Desk top mounted projection, ceiling mounted
projection, floor mounted projection and rear projection
capabilities •Can be used with screens from 90 to 300 inches
in size with simple adjustments
Supplied accessories: Remote control unit RM-PJ1001
Remote control cable 15 m (Stereo Mini Jack)
Adjustment plate
AA size battery (3)
AC power cord
Operating manual
Installation manual
Optional accessories: Interface board: IFB-12A/21/50/1000/1400/G90E*
4
Signal interface cables: SIC-10/20A/20C/22/M1/M5/
M15/M25/M50
Signal interface switchers: PC-3000/1271M
Interface unit: IFU-1271M
Suspension support: PSS-90/10
Infrared remote control receiver: RM-PJ10
Signal adaptor: ADP-20
HD D-sub 15-pin to 5 BNC cable: SMF-400
HD D-sub 15-pin to HD D-sub 15-pin cable: SMF-401
Projection lens: VPHL-9270
100-inch flat screen*
1
: VPS-100FH
120-inch flat screen*
1
: VPS-120FH
Specifications
General
Video signal system: CCIR 625 lines, 50 fields/EIA 525 lines, 60 fields
(switching of CCIR to EIA or vice versa is
automatically done)
Colour system: PAL/NTSC/SECAM/NTSC
4.43 automatically selected
Brightness: ANSI*
2
350 lm (fH: 150 kHz, fV: 50 Hz, 6500 K)
ANSI 130 lm (fH: 15 kHz, fV: 60 Hz, 6500 K)
Peak white: 1300 lm
All white: 500 lm
Colour temperature: 6500K
RGB bandwidth: 135 MHz (-3dB)
Resolution: 700 TV lines (video), 1100 TV lines (HDTV)
2500 × 2000 pixels
(RGB, measured at fH: 102 kHz, fV: 50 Hz)
Scanning frequency: Horizontal: 15 to 150 kHz
Vertical: 38 to 150 Hz
Test signals: Cross hair, Hatch reverse (9 × 9/17 × 17), Dot (9 × 9),
Dot (17 × 17) & Hatch (5 × 5), H/H reverse,
ME/ME reverse, All white, Window,
Window and line colour bar, Pluge,
Stair-step, Sub-pattern, Cross (9 × 9),
Hatch (5 × 5), 10 IRE, 100 IRE
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: Max. 1000 W, Stand-by 14 W,
Power saving mode 600 W
Heat dissipation: 3412.5 BTU
Mass: Approx. 110 kg (242 lb 8 oz)
Operating temperature: 0 to 40 °C (14 to 104 °F)
Operating humidity: 35 to 85%
Inputs/Outputs
Video*
4
:
Composite*
5
: Loop-through BNC
1Vp-p, ±2 dB sync negative,
75Ω automatic termination*
6
Y IN: BNC, 1 Vp-p ±2 dB sync negative, 75 Ω terminated
C IN: BNC, 0.3 Vp-p ±2 dB (PAL), 75 Ω terminated or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω terminated
Y/C IN*
5
: Loop-through Mini DIN 4-pin
Y (luminance): 1.0 Vp-p ±2 dB sync negative,
75 Ω automatic termination*
6
C (chrominance):0.3 Vp-p ±2 dB (PAL) 75 Ω automatic termination*
6
or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω automatic
termination*
6
Input A:
Analogue RGB/
Component: BNC
R/R-Y/P
R: 0.7 Vp-p, ±2 dB positive, 75 Ω terminated
G/Y: 0.7 Vp-p, ±2 dB positive, 75 Ω terminated
G with Sync: 1.0 Vp-p, ±2 dB sync negative, 75 Ω terminated
B/B-Y/P
B: 0.7 Vp-p, ±2 dB positive, 75 Ω terminated
SYNC/HD: Composite sync:
0.6 to 8.0 Vp-p, high impedance positive/negative
Horizontal sync:
0.6 to 8.0 Vp-p, high impedance positive/negative
VD: Vertical sync:
0.6 to 8.0 Vp-p, high impedance positive/negative
HDVS (Y/P
B/PR): BNC
Y: 1.0 Vp-p ±2 dB, 75 Ω terminated
P
B/PR: Tri-sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p,
±0.35 Vp-p ±2 dB, 75 Ω
HDVS (GBR): BNC
G with sync: 1.0 Vp-p ±2 dB, 75Ω terminated
Tri-sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p
B/R: 0.7 Vp-p ±2 dB, 75 Ω terminated
INPUT B: Open slot for optional IFB boards
Control S
/PLUG IN POWER:
IN: Stereo Mini Jack
5.0 Vp-p, Plug-in power DC 5 V, Max. output: 60 mA
OUT: 5.0 Vp-p
REMOTE:
RS-232C/RS-422A: IN: D-sub 9-pin (Female)
PJ COM (RS-485): IN: D-sub 9-pin (Female)
OUT: D-sub 9-pin (Female)
LINK:
IN: Stereo Mini Jack
OUT: Stereo Mini Jack
TRIG: Mini Jack
Power ON: DC 12 V, Output impedance 4.7 kΩ
Power OFF: 0 V
*1 Some items are not available in some areas. For details, please consult your nearest
Sony office.
*2 ANSI lumens is a measuring method of American National Standards Institute IT7.215.
*3 Applicable for VPH-G90M only.
*4 VPH-G90E requires optional IFB-G90E video input board. IFB-G90E is applicable for
VPH-G90E only.
*5 The Y/C input has priority over the Video input.
*6 75 Ω termination is automatically set to OFF when connection is made to the OUT
connector.
VPH-G90E
VPH-G90M