Specifications

–147–
DISPLAY
PRODUCTS
2-1 Multiscan projectors
VPH-G70QM/G70QMG*
1
(PAL/NTSC/SECAM/NTSC
4.43/PAL-M)
•Multiscan capability: horizontal 15 kHz to 110 kHz, vertical 38 Hz to
150 Hz •Incorporates newly developed 8-inch electromagnetic focus
CRTs •Incorporates an universal optical coupling •Remarkable light
output of ANSI lumens9 (colour temperature: 6500°K): 240 lm (fH:
110 kHz, fV: 60 Hz)/ 200 lm (fH: 15 kHz, fV: 60 Hz), Peak white:
1200 lm •High resolution of 700 TV lines (video)/1100 TV lines
(HDTV*
3
)/1700 × 1200 pixels (RGB in at fH: 74 kHz, fV: 60 Hz)
•Wide RGB bandwidth of 120 MHz •New hybrid HACC lens for
superb, stable picture performance •Precise registration with the
Key/Pin balance mode and 25-point zone adjustment •Input memory
and Video memory available for facilitated set up •Independent
brightness and colour uniformity adjustments •Incorporates the
Picture orbiting function •Simplified operation for multi-projection
applications such as ABL link and Index operation functions
•Optional internal line-doubler board available •Video decoder circuit
for enhance video picture quality •Various optional accessories
available for system versatility •Desk top mounted projection, ceiling
mounted projection, floor mounted projection and rear projection
capabilities •Can be used with screens from 60 to 300 inches in size
with simple adjustments
Supplied accessories: Remote commander RM-PJ1000
Remote commander cable (15m)
Adjusting plate
AA size (R6) battery × 3
AC power cord
Operation manual
Installation manual
Optional accessories: Interface board IFB-12/20/21/1000/1301/1400/G70QMG*
1
Signal interface cable SIC-10/20A/20C/21/22
Multi-cable*
1
CCQ-BRS cable (14-14pin: 2/5/10/25/50m)
SIC-M cable (14-14pin: 1/5/15/25/50m)
Signal interface switcher PC-1271M
Extension board EXB-DS10 (internal line-doubler board)
Interface unit IFU-1271M*
1
Suspension support PSS-70
Suspension support PSS-10
Remote commander RM-PJM800
Infrared remote control receiver RM-PJ10
Mouse receiver RM-PJ21
Signal adaptor ADP-10
(HD D-sub 15-pin to D-sub 9-pin for SIC cable)
Signal adaptor ADP-20 (Macintosh
®
to VGA)
Monitor cable SMF-400 (HD D-sub 15-pin to 5BNC)
Monitor cable SMF-401 (HD D-sub 15-pin to HD D-sub 15-pin)
9-pin remote cable RCC-5G/10G/30G
(D-sub 9-pin to D-sub 9-pin for RS-422A)
100-inch flat screen VPS-100FH*
1
120-inch flat screen VPS-120FH*
1
Specifications
Optical
Projection system: 3 picture tubes, 3 lenses, direct projection system
Picture tube: 8-inch (phosphor size 6-inch) high luminance, electromagnetic
focus tubes
Projection lens: Double focus, F1.1/135 mm
Screen coverage: 60 to 300-inch measured diagonally, factory preset to 120-inch
Light output: ANSI*
2
: 240lm (fH: 110 kHz, fV: 50 Hz, 6500K)
200 lm (fH: 15 kHz, fV: 60 Hz, 6500K)
1200 lm (peak white)
320 lm (all white)
Throwing distance: 60-inch 1668 mm (5 ft 5
21
/32 inches)
70-inch 1921 mm (6 ft 3
5
/8 inches)
100-inch 2689 mm (8 ft 9
7
/8 inches)
120-inch 3200 mm (10 ft 5
31
/32 inches)
150-inch 3972 mm (13 ft
3
/8 inches)
200-inch 5254 mm (17 ft 2
27
/32 inches)
250-inch 6539 mm (21 ft 5
7
/16 inches)
300-inch 7831 mm (25 ft 8
5
/16 inches)
Signals
Colour system: PAL, NTSC, SECAM, NTSC4.43, PAL-M
Resolution: 700 TV lines (video)
1100 TV lines (HDTV)
1700 × 1200 pixels
(RGB, measured at fH: 74 kHz, fV: 60 Hz)
Scanning frequency: Horizontal: 15 to 110 kHz
Vertical: 38 to 150 Hz
RGB bandwidth: 120 MHz (-3 dB)
General
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 720 W, Standby: 7 W
Heat dissipation: 2593.4 BTU
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85%
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Dimensions: 695 (W) × 358 (H) × 948 (D) mm
(27
3
⁄8 × 14
1
⁄8 × 37
5
⁄16 inches)
Mass: Approx. 83 kg (183 lb)
Inputs/Outputs
Video*
4
:
Composite: Loop-through BNC
1.0 Vp-p ±2 dB sync negative, 75 Ω
Y IN: 1.0 Vp-p ±2 dB sync negative, 75 Ω
C IN: 0.3Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Y/C IN: Loop-through Mini DIN 4-pin
Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
C: 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Input A: BNC × 5
Analog RGB/Component:
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
G: 0.7 Vp-p ±2 dB positive, 75 Ω,
G with sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
Sync/HD:
Composite sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
VD:
Vertical sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
HDTV*
3
(Y/PB/PR):
Y: 1.0 Vp-p ±2 dB, 75 Ω
P
B/PR: Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
±0.35 Vp-p ±2 dB, 75 Ω
HDTV*
3
(GBR):
G with sync: 1.0 Vp-p ±2 dB, 75 Ω
Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ±2 dB, 75 Ω
Input B:
Supplied with an IFB-40:
14-pin multi connector (input: male, output: female)
CONTROL S IN/ Stereo mini-jack
PLUG IN POWER: 5.0 Vp-p, plug in power DC 5 V, maximum output 60 mA
OUT: Stereo mini-jack
5.0 Vp-p
REMOTE
RS-422A: D-sub 9-pin (female)
ABL Link
IN: Mini-jack
OUT: Mini-jack
TRIG: Mini-jack
Power On: DC 5 V, output impedance 4.7 kΩ
Power Off: 0 V
Safety regulations EN60 950 (TÜV), CE, PTB, C-Tick Mark
*1 Some items are not available in some areas. For details, please consult your nearest
Sony office.
*2 ANSI lumens is a measuring method of American National Standards Institute IT 7.215.
*3 HDTV: 1125/60 interlaced HDTV studio standard system.
*4 With the optional IFB-G70QMG installed in the VPH-G70QMG.
VPH-G70QMG VPH-G70QM