Specifications

–148–
DISPLAY
PRODUCTS
2-1 Multiscan projectors
VPH-G70VRM*
1
(PAL/NTSC/SECAM/NTSC
4.43/PAL-M)
•Designed specifically for use in Virtual Reality and
Simulation applications •Deep focussing area, high resolution
lenses, and extended geometry for use with curved and
dome-style screens •Multiscan capability: horizontal 15 kHz
to 110 kHz, vertical 38 Hz to 150 Hz •Accepts composite and
S Video signals when an appropriate optional interface board
is installed •Incorporates newly developed 8-inch
electromagnetic focus CRTs •Incorporates a universal optical
coupling •High resolution of 700 TV lines (video)/1100 TV
lines (HDTV*
2
)/1700 × 1200 pixels (RGB measured at fH: 74
kHz, fV: 60 Hz) •Wide RGB bandwidth of 120 MHz •New
hybrid HACC lens for superb, stable picture performance
•Precise registration with the Key/Pin balance mode and 25-
point zone adjustment •Input memory and Video memory
available for facilitated set up •Independent brightness and
colour uniformity adjustments •Incorporates the picture
orbiting function •Simplified operation for multi-projection
applications such as ABL link and Index operation functions
•Optional internal line-doubler board available •Video
decoder circuit for enhanced video picture quality •Various
optional accessories available for system versatility •Can be
used with screens from 60 to 300 inches in size with simple
adjustments •Black cabinet suitable for Virtual Reality and
Simulation installations
Supplied accessories: Remote commander RM-PJ1000
Remote commander cable (15 m)
Adjustment plate
AA size (R6) battery (3)
AC power cord
Operation manual
Installation manual
Optional accessories: Interface board IFB-12/20/21/40/50/1000/1400
Signal interface cable SIC-10/20A/20B/20C/21/22*
1
CCQ-BRS cable (14-14pin: 2/5/10/25/50 m)
SIC-M cable (14-14pin: 1/5/15/25/50 m)
Signal interface switcher PC-1271M
Extension board EXB-DS10 (internal line-doubler
board)
Interface unit IFU-1271M
Suspension support PSS-70
Suspension support PSS-10
Remote commander RM-PJM800
Infrared remote control receiver RM-PJ10
Mouse receiver RM-PJ21
Signal adaptor ADP-10 (HD D-sub 15-pin to
D-sub 9-pin)
Signal adaptor ADP-20 (Macintosh
®
to VGA)
Monitor cable SMF-400 (HD D-sub 15-pin to 5 BNC)
Monitor cable SMF-401 (HD D-sub 15-pin to HD
D-sub 15-pin)
9-pin remote cable RCC-5G/10G/30G (D-sub 9-pin to
D-sub 9-pin for RS-422A)
100-inch flat screen VPS-100FH*
1
120-inch flat screen VPS-120FH*
1
Specifications
Optical
Projection system: 3 picture tubes, 3 lenses, direct projection system
Picture tube: 8-inch (phosphor size 6-inch) high luminance, optical
doubled, electromagnetic focus tubes
Projection lens: Double focus, F1.2/135 mm
(colour purity improved: C element of Red/Green)
Screen coverage*
3
: 60 to 300 inches (viewable area, measured
diagonally)
(factory preset to 120 inches)
Acceptable screen radius:
Flat to 2500 mm radius
Acceptable throw angle: -2 ° to +30 °
Light output: ANSI*
4
: 200 lm (fH: 110 kHz, fV: 60 Hz, 6500K)
ANSI*
4
: 170 lm (fH: 15 kHz, fV: 60 Hz, 6500K)
Peak white: 1000 lm, All white: 290 lm
Throwing distance: 60-inch 1668 mm (5 ft 5
21
⁄32 inches)
70-inch 1921 mm (6 ft 3
5
⁄8 inches)
100-inch 2689 mm (8 ft 9
7
⁄8 inches)
120-inch 3200 mm (10 ft 5
31
⁄32 inches)
150-inch 3972 mm (13 ft
3
⁄8 inches)
200-inch 5254 mm (17 ft 2
27
⁄32 inches)
250-inch 6539 mm (21 ft 5
7
⁄16 inches)
300-inch 7831 mm (25 ft 8
5
⁄16 inches)
Signals
Colour system: PAL, NTSC, SECAM, NTSC
4.43, PAL-M
(automatically selected)
Resolution: 700 TV lines (video), 1100 TV lines (HDTV)
1700 × 1200 pixels
(RGB, measured at fH: 74 kHz, fV: 60 Hz)
Scanning frequency: Horizontal: 15 to 110 kHz
Vertical: 38 to 150 Hz
RGB bandwidth: 120 MHz (-3 dB)
General
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 720 W, Standby: 7 W
Heat dissipation: 2457.0 BTU
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85%
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Dimensions: 695 (W) × 358 (H) × 948 (D) mm
(27
3
⁄8 × 14
1
⁄8 × 37
5
⁄16 inches)
Mass: Approx. 83 kg (183 lb)
Inputs/Outputs
Input A
Analogue RGB/Component: BNC
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
G/Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
G with sync: 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
Sync/HD
Composite sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
VD:
Vertical sync:
0.6 to 8.0 Vp-p, high impedance, sync positive/negative
HDTV*
2
(Y/PB/PR): BNC
Y: 1.0 Vp-p ±2 dB, 75 Ω terminated
P
B/PR: Tri-sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p
±0.35 Vp-p ±2 dB, 75 Ω
HDTV*
2
(GBR): BNC
G with sync: 1.0 Vp-p ±2 dB, 75 Ω terminated
Tri-sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ±2 dB, 75 Ω terminated
Input B: Open slot for optional IFB board
CONTROL S IN/ Stereo mini-jack 5.0 Vp-p,
PLUG IN POWER: Plug in power DC 5 V, Max. output: 60 mA
CONTROL S OUT: Stereo mini-jack 5.0 Vp-p
REMOTE
RS-422A: D-sub 9-pin (female)
ABL Link
IN: Mini-jack
OUT: Mini-jack
TRIG: Mini-jack
Power On: DC 12 V, output impedance 4.7 kΩ
Power Off: 0 V
Safety regulations EN 60 950 (TÜV), CE, PTB
*1 Some items are not available in some areas. For details, please consult your nearest
Sony office.
*2 HDTV: 1125/60 interlaced HDTV studio standard system.
*3 Throw angle: 15.2°, screen radius = 0 mm.
*4 ANSI lumens is a measuring method of American National Standards Institute IT7.215.