Specifications

2-1 Multiscan projectors
–149–
DISPLAY
PRODUCTS
VPH-D50QM*
1
(PAL/NTSC/SECAM/NTSC
4.43/PAL-M)
•Multiscan capability: horizontal 15 kHz to 64 kHz, vertical 38
Hz to 150 Hz •Incorporates newly developed 7-inch static
focus CRTs •Incorporates an universal air coupling
•Remarkable light output of ANSI lumens*
2
(colour
temperature: 6500°K): 160 lm (fH: 64 kHz, fV: 50 Hz)/130 lm
(fH: 15 kHz, fV: 60 Hz), Peak white: 800 lm •High resolution of
700 TV lines (video)/1000 TV lines (HDTV*
3
)/1280 x 1024
pixels (RGB in at fH: 64 kHz, fV: 60 Hz) •Wide RGB
bandwidth of 75 MHz •Precise registration with the Key/Pin
balance mode •Input memory and Video memory available for
facilitated set up •Video decoder circuit for enhanced video
picture quality •Incorporates the Picture orbiting function
•Simplified operation for multi-projection applications such as
ABL link and Index operation functions •Optional internal line-
doubler board available •Various optional accessories
available for system versatility •Desk top mounted projection,
ceiling mounted projection, floor mounted projection and rear
projection capabilities •Can be used with screens from 60 to
250 inches in size with simple adjustments
Supplied accessories: Remote commander RM-PJ1000
Remote commander cable (15m)
Adjusting plate
AA size (R6) battery × 3
AC power cord
Operation manual
Installation manual
Optional accessories: Interface board IFB-12/20/21/1000/1301/1400
Signal interface cable SIC-10/20A/20C/21/22
Multi-cable*
1
CCQ-BRS cable (14-14pin: 2/5/10/25/50m)
SIC-M cable (14-14pin: 1/5/15/25/50m)
Signal interface switcher PC-1271M
Extension board EXB-DS10 (internal line-doubler board)
Interface unit IFU-1271M*
1
Suspension support PSS-70
Suspension support PSS-10
Remote commander RM-PJM800
Infrared remote control receiver RM-PJ10
Mouse receiver RM-PJ21
Signal adaptor ADP-10
(HD D-sub 15-pin to D-sub 9-pin for SIC cable)
Signal adaptor ADP-20 (Macintosh
®
to VGA)
Monitor cable SMF-400 (HD D-sub 15-pin to 5BNC)
Monitor cable SMF-401
(HD D-sub 15-pin to HD D-sub 15-pin)
9-pin remote cable RCC-5G/10G/30G
(D-sub 9-pin to D-sub 9-pin for RS-422A)
100-inch flat screen VPS-100FH*
1
120-inch flat screen VPS-120FH*
1
Specifications
Optical
Projection system: 3 picture tubes, 3 lenses, direct projection system
Picture tube: 7-inch (phosphor size 5.5-inch) static focus CRT
Projection lens: Double focus, F1.0/135 mm
Screen coverage: 60 to 250-inch measured diagonally, factory preset to 120-
inch
Light output: ANSI*
2
: 160 lm (fH: 64 kHz, fV: 50 Hz, 6500K)
130 lm (fH: 15 kHz, fV: 60 Hz, 6500K)
800 lm (peak white)
200 lm (all white)
Throw distance: 60-inch 1902 mm (6 ft 2
7
⁄8 inches)
70-inch 2179 mm (7 ft 1
25
⁄32 inches)
100-inch 3016 mm (9 ft 10
3
⁄4 inches)
120-inch 3571 mm (11 ft 8
19
⁄32 inches)
150-inch 4424 mm (14 ft 6
3
⁄16 inches)
200-inch 5844 mm (19 ft 2
3
⁄32 inches)
250-inch 7257 mm (23 ft 9
23
⁄32 inches)
Signals
Colour system: PAL, NTSC, SECAM, NTSC
4.43, PAL-M
Resolution: 700 TV lines (video)
1000 TV lines (HDTV)
1280 × 1024 pixels (RGB, measured at fH: 64 kHz, fV: 60 Hz)
Scanning frequency: Horizontal: 15 to 64 kHz
Vertical: 38 to 150 Hz
RGB bandwidth: 75 MHz -3 dB
General
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 450 W, Standby: 7 W
Heat dissipation: 1535.7 BTU
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85%
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Dimensions: 603 (W) × 345 (H) × 671 (D) mm
(23
3
⁄4 × 13
5
⁄8 × 26
1
⁄2 inches)
Mass: Approx. 54 kg (119 lb 1 oz)
Inputs/Outputs
Video: Loop-through BNC
1.0 Vp-p ±2 dB sync negative, 75 Ω
S Video:
Y IN: BNC
1.0 Vp-p ±2 dB sync negative, 75 Ω
C IN: BNC
0.3 Vp-p ±2 dB (PAL), 75 Ω
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Y/C IN: Loop-through mini DIN 4-pin
Y (luminance): 1.0 Vp-p ±2 dB sync negative, 75 Ω
C (chrominance): 0.3 Vp-p ±2 dB (PAL), 75 Ω
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Input A: BNC × 5
Analogue RGB/Component:
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
G: 0.7 Vp-p ±2 dB positive, 75 Ω
G with sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
Sync/HD:
Composite sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
VD:
Vertical sync: 0.6 to 8.0 Vp-p, high impedance, positive/negative
HDTV*
3
(Y/PB/PR):
Y: 1.0 Vp-p ±2 dB, 75 Ω
P
B/PR: Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
±0.35 Vp-p ±2 dB, 75 Ω
HDTV*
3
(GBR):
G with sync: 1.0 Vp-p ±2 dB, 75 Ω
Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ±2 dB, 75 Ω
Input B:
Supplied with an IFB-40: 14-pin multi connector (input: male, output: female)
CONTROL S IN/ Stereo mini-jack
PLUG IN POWER: 5.0 Vp-p, plug in power DC 5 V, maximum output 60 mA
OUT: Stereo mini-jack, 5.0 Vp-p
REMOTE
RS-422A: D-sub 9 pin (female)
ABL Link
IN: Stereo mini-jack
OUT: Stereo mini-jack
TRIG: Mini-jack
Power On: DC 5 V, output impedance 4.7 kΩ
Power Off: 0 V
Safety regulations EN60 950 (TÜV), CE, PTB, C-Tick Mark
*1 Some items are not available in some areas. For details, please consult your nearest
Sony office.
*2 ANSI lumens is a measuring method of American National Standards Institute IT 7.215.
*3 HDTV: 1125/60 interlaced HDTV studio standard system.