Specifications

–150–
DISPLAY
PRODUCTS
2-1 Multiscan projectors
VPH-D50HTM (PAL/NTSC/SECAM/NTSC 4.43 /PAL-M)
•Multiscan capability: horizontal 15 kHz to 64 kHz, vertical 38
Hz to 150 Hz •Incorporates newly developed 7-inch static
focus CRTs •Incorporates a universal air coupling
•Remarkable light output of ANSI lumens*
1
(colour
temperature: 6500°K): 160 lm (fH: 64 kHz, fV: 50 Hz)/130 lm
(fH: 15 kHz, fV: 60 Hz), Peak white: 800 lm •High resolution of
700 TV lines (video)/1000 TV lines (HDTV*
2
)/1280 × 1024
pixels (RGB in at fH: 64 kHz, fV: 60 Hz) •Wide RGB
bandwidth of 75 MHz •Precise registration with the Key/Pin
balance mode •Input memory and Video memory available for
facilitated set up •Video decoder circuit for enhanced video
picture quality •Incorporates the picture orbiting function
•Simplified operation for multi-projection applications such as
ABL link and Index operation functions •Internal line-doubler
board included as a standard feature •Various optional
accessories available for system versatility •Table-top
projection, ceiling mounted projection, floor mounted
projection and rear projection capabilities •Can be used with
screens from 60 to 250 inches in size with simple adjustments
Supplied accessories: Remote commander RM-PJ1001
Remote commander RM-PJD50
Remote commander cable (15 m)
Adjustment plate
AA size (R6) battery (3)
Button battery CR2025 (1)
AC power cord
Operating manual
Installation manual
Optional accessories: Signal interface cable SIC-10
Interface unit IFU-1271M
Suspension support PSS-70
Suspension support PSS-10
Remote commander RM-PJM800
Infrared remote control receiver RM-PJ10
Mouse receiver RM-PJ21
Monitor cable SMF-400 (HD D-sub 15-pin to 5 BNC)
Remote cable RCC-5G/10G/30G
(D-sub 9-pin to D-sub 9-pin for RS-422A)
100-inch flat screen VPS-100FH*
3
120-inch flat screen VPS-120FH*
3
Specifications
Optical
Projection system: 3 picture tubes, 3 lenses, direct projection system
Picture tube: 7-inch (phosphor size 5.5-inch) high luminance air
coupled (Colour corrected: Red/Green), static focus
tubes
Projection lens: Double focus, F1.0/135 mm
Screen coverage: 60 to 250 inches measured diagonally
(factory preset to 100 inches)
Light output: ANSI*
1
: 160 lm (fH: 64 kHz, fV: 50 Hz, 6500K)
ANSI*
1
: 130 lm (fH: 15 kHz, fV: 60 Hz, 6500K)
Peak white: 800 lm
All white: 200 lm
Throw distance: 60-inch 1902 mm (6 ft 2
7
⁄8 inches)
(in 4:3 mode) 70-inch 2179 mm (7 ft 1
25
⁄32 inches)
100-inch 3016 mm (9 ft 10
3
⁄4 inches)
120-inch 3571 mm (11 ft 8
19
⁄32 inches)
150-inch 4424 mm (14 ft 6
3
⁄16 inches)
200-inch 5844 mm (19 ft 2
3
⁄32 inches)
250-inch 7257 mm (23 ft 9
23
⁄32 inches)
Signals
Colour system: PAL, NTSC, SECAM, NTSC
4.43, PAL-M
Resolution: 700 TV lines (video)
1000 TV lines (HDTV)
1280 × 1024 pixels (RGB, measured at
fH: 64 kHz, fV: 60 Hz)
Scanning frequency: Horizontal: 15 to 64 kHz
Vertical: 38 to 150 Hz
RGB bandwidth: 75 MHz (-3 dB)
General
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 450 W, Standby: 7 W
Heat dissipation: 1535.7 BTU
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85%
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Dimensions: 603 (W) × 345 (H) × 671 (D) mm
(23
3
⁄4 × 13
5
⁄8 × 26
1
⁄2 inches)
Mass: Approx. 54 kg (119 lb 1 oz)
Inputs/Outputs
Video
Composite: Loop-through BNC
1.0 Vp-p ±2 dB sync negative, 75 Ω automatic
termination
Y IN: BNC, 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
C IN: BNC, 0.3 Vp-p ±2 dB (PAL), 75 Ω terminated or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω terminated
Y/C IN: Loop-through Mini DIN 4-pin
Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω automatic
termination
C: 0.3 Vp-p ±2 dB (PAL), 75 Ω automatic termination or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω automatic
termination
Input A/B
Analogue RGB/Component: BNC
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
G/Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
G with sync: 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
Sync/HD
Composite sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, sync positive/negative
VD
Vertical sync:
0.6 to 8.0 Vp-p, high impedance, sync positive/negative
HDTV*
2
(Y/PB/PR): BNC
Y: 1.0 Vp-p ±2 dB, 75 Ω terminated
P
B/PR: Tri- sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p
±0.35 Vp-p ±2 dB, 75 Ω
HDTV*
2
(GBR): BNC
G with sync: 1.0 Vp-p ±2 dB, 75 Ω terminated
Tri-sync: ±0.3 Vp-p, bi-sync: 0.3 Vp-p
B/R: 0.7 Vp-p ±2 dB, 75 Ω terminated
Video (YC)*
4
Y: BNC, 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
C: BNC, 0.3 Vp-p ±2 dB (PAL), 75 Ω terminated or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω terminated
Video (Composite)*
4
VIDEO: 1.0 Vp-p ±2 dB sync negative, 75 Ω automatic
termination
CONTROL S IN/ Stereo mini-jack 5.0 Vp-p,
PLUG IN POWER: Plug in power DC 5 V, Max. output 60 mA
CONTROL S OUT: Stereo mini-jack 5.0 Vp-p
REMOTE
RS-422A: D-sub 9 pin (female)
ABL Link
IN: Mini-jack
OUT: Mini-jack
TRIG: Mini-jack
Power On: DC 12 V, output impedance 4.7 kΩ
Power Off: 0 V
Safety regulations EN 60 950 (TÜV), CE, PTB
*1 ANSI lumens is a measuring method of American National Standards Institute IT 7.215.
*2 HDTV: 1125/60/2:1 and 1125/59.94/2:1 (SMPTE-240M/274M) HDTV systems.
*3 Some items are not available in some areas. For details, please consult your nearest
Sony office.
*4 Input B only.