Specifications

RVP-411DMS (PAL/NTSC/SECAM/NTSC4.43)
•41-inch projection wall unit for various projection wall
applications •Light in weight (75 kg) and a short cabinet
depth (1044 mm) for easier handling and stacking •Input
capability: double scan video signals and computer signals
which conform to VGA mode 3 (31.469 kHz/59.94 Hz)
standard •Optional PWB-411D video input board available
for composite, Y/C, component and 15 kHz RGB video
signals •Double scan capability for flicker free signal
reproduction when using with the optional PWB-411D video
input board •Adopts optical coupling CRT for high contrast
image display •Colour temperature selection:
3200K/6500K/9300K/User preset (factory preset: 6500K)
•Two-part construction enables the CRT assembly, together
with the electronic chassis, to be easily separated from the
cabinet •Wide viewing angle: horizontal 160 degrees, vertical
60 degrees •Optional VPS-415RF/411RF screens with ultra-
thin screen surround are available •Optional CHP-411DM
projection wall chassis available for system versatility
•Optional wired/wireless remote control unit RM-PJ1292*
1
with address function for all projector control functions,
including inputs selection, picture control, RGB size and shift
and centering controls
Supplied Accessories: AC power cord (1)
Remote control cable (1.2 m × 1)
Operation manual (1)
Optional Accessories: VPS-415RF: Optional Screen with 0.2 mm screen
surround
VPS-411RF: Optional Screen with 0.2 mm screen
surround
PWK-411D: System Control Kit
(Including RM-PJ1292 Remote
Commander and installation manual)
PWB-411D: Video Input Board
PWR-B411A: Base Stand
PWR-P412A: Position Beam for dual mount
PWR-P413A: Position Beam for triple mount
RM-PJ10: Remote Control Receiver
RCC-1W2: 9-pin remote cable
(D-sub 9-pin M to D-sub 9-pin M for
RS-422)
Specifications
Optical
Projection System: 3 picture tubes, 3 lenses, rear projection
Picture Tube: 7.7-inch (5.5-inch raster size) high-luminance
monochrome optical coupled with sealed coolant
Projection Lens: High performance lens, F1.1/77 mm
Screen: Optional (See Optional Accessories)
Light Output*
2
: ANSI*
3
: 280 cd/m
2
(fH: 31.5 kHz, fV: 60 Hz)
Colour temperature: 6500°K
Peak white: 2056 cd/m
2
Electrical
Scan Frequency: 31.25 kHz/50 Hz/1:1, 31.25 kHz/100 Hz/2:1
31.5 kHz/60 Hz/1:1, 31.5 kHz/120 Hz/2:1
(Horizontal Frequency/Vertical Frequency/Interlace
Ratio)
Resolution: 800 × 580 dots (measured at RGB 31.25 kHz input)
RGB Bandwidth: 30 MHz (-3 dB)
Test Signal: Cross hair, Hatch (fine), Diagonal hatch, Circle
hatch, Dot pattern, H pattern, ME, Window, All white
(100 IRE), Black
Input: RGB: BNC × 5
31 kHz: R: 0.7 Vp-p ±2 dB, 75 Ω
G: 0.7 Vp-p ±2 dB, 75 Ω
G on sync: 1.0 Vp-p ±2 dB, 75 Ω,
sync negative
B: 0.7 Vp-p ±2 dB, 75 Ω
H sync/C sync:1.0 to 4.0 Vp-p, 75 Ω,
positive/negative
V sync: 1.0 to 4.0 Vp-p, 75 Ω,
positive/negative
15 kHz: *Available when an optional PWB-411D Video Input
Board is inserted. See PWB-411D specifications.
Control-S: Mini Jack (mono)
Remote: RS-422: D-sub 9-pin connector (female)
Linked ABL: Mini Jack (mono)
Output:
Control-S: Mini Jack (mono)
Remote: RS-422: D-sub 9-pin connector (female)
Linked ABL: Mini Jack (mono)
General
Power Supply: AC 200 to 240 V, 50/60 Hz
Power Consumption: 200 to 240 V, 1.4 A, 300 W
Dimensions (max.): 830 (W) × 641 (H) × 1044 (D) mm
(32
3
⁄4 × 25
1
⁄4 × 41
1
⁄8 inches)
Mass: 75 kg (165 lb 6 oz)
2-2. Projection wall units
–152–
DISPLAY
PRODUCTS
*1 RM-PJ1292 is included in the system control kit PWK-411D.
*2 In the case of the RVP-411DMS with the VPS-411RF optional screen.
*3 ANSI lumens is a measuring method of the American National Standards Institute IT 7.215.