Specifications

–154–
DISPLAY
PRODUCTS
2-3 Video projectors
VPH-V20M*
1
(PAL/NTSC/SECAM/NTSC
4.43)
•Remarkable light output of 700 lm(peak white) •Accepts
Component (Y/R-Y/B-Y or RGB), Y/C and Composite Video
signals •A high resolution of 700 TV lines (composite
video)/1000 TV lines(RGB) •Supplied remote control unit
RM-PJV20 controls all projector functions •Desk top mounted
projection, ceiling mounted projection, floor mounted
projection and rear projection capabilities •Can be used with
a screen from 70 to 250 inches in size with simple
adjustment
Supplied accessories: Remote commander RM-PJV20
AA size batteries (2)
AC power cord
Spacer for 508 cm (200-inch) front projection
Spacer (0.2 mm) for 254 cm (70 to 100-inch )
rear projection
Spacer (0.8 mm) for 254 cm (70 to 100-inch )
rear projection
Operating manual
Installation manual
Optional accessories: Signal interface cable SIC-10
Interface unit: IFU-1271M
Suspension support: PSS-722/10
Remote control receiver RM-PJ10
100-inch flat screen VPS-100FH*
1
120-inch flat screen VPS-120FH*
1
70-inch rear screen VPS-702R
Specifications
Optical
Projection system: 3 picture tubes, 3 lenses, direct projection system
CRT: 7-inch (Phosphor size: 5.5-inch) liquid cooled high
brightness monochrome tubes
Projection lens: High performance hybrid multi-coated lens
F1.0/130 mm
Screen 70-inch (177.8 cm) to 250-inch (635 cm) measured
diagonally (Factory preset: 100-inch (254 cm))
Light output: ANSI*
2
100 lm (15 kHz: 60 Hz, 6500 K)
Peak white: 700 lm, All white: 140 lm
Throwing distance: 100-inch (254 cm):3301 mm (Approx. 11 ft)
200-inch (508 cm):6417 mm (Approx. 21 ft)
Signals
Colour system: PAL, NTSC, SECAM, NTSC
4.43*
3
automatically
selected
Resolution: 700 TV lines (Composite video input)
1000 TV lines (RGB input)
Test signals: Cross hair
General
Power requirements: 220 V AC to 240 V AC, 50/60 Hz
Power consumption: 210 W
Operating temperature: 0 to 40 °C (14 to 104 °F)
Operating humidity: 35 to 85%
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Dimensions: 532 (W) × 288 (H) × 597 (D) mm
(21 × 11
1
⁄8 × 23
5
⁄8 inches)
Mass: Approx. 30 kg (66 lb 2 oz)
Heat dispersion: 716.6 BTU
Inputs/Outputs
VIDEO IN:
Video*
4
: BNC 1.0 Vp-p ±2 dB, sync negative, 75 Ω
S video*
4
: Mini DIN 4-pin
Y (luminance): 1.0 Vp-p ±2 dB, sync negative, 75 Ω
C (chrominance): 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75Ω
VIDEO OUT:
Video: BNC 1.0 Vp-p ±2 dB, 75 Ω
INPUT A:
Analogue RGB/Component:
BNC
R/R-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
G: 0.7 Vp-p ±2 dB, positive, 75 Ω
G with Sync/Y: 1.0 Vp-p ±2 dB, sync negative, 75 Ω
B/B-Y: 0.7 Vp-p ±2 dB, positive, 75 Ω
SYNC/HD:
Composite sync: 0.6 to 8.0 Vp-p, high impedance negative
Horizontal sync: 0.6 to 8.0 Vp-p, high impedance negative
VD:
Vertical sync: 0.6 to 8.0 Vp-p, high impedance negative
Control S: Loop-through Stereo Mini Jack
Safety Regulations:
EN60 065 (TÜV), CE, C-Tick, PTB
*1 Some items are not available in some areas. For details, please consult your nearest Sony office.
*2 ANSI lumens is a measuring method of American National Standards Institute IT7.215.
*3 The NTSC
4.43 system refers to an NTSC colour system in which the subcarrier frequency is modified to 4.43 MHz.
*4 S VIDEO input has priority over Composite video input.