Specifications

2-4 LCD projectors
–155–
DISPLAY
PRODUCTS
VPL-FE100E/FE100M (PAL/NTSC/SECAM/NTSC4.43/PAL-M)
LCD Data Projector
•SXGA resolution LCD (Liquid Crystal Display)-based data
projector •Three LCD panels for a total of 3,932,160 pixels
(1,310,720 pixels x 3 panels) •Four 120 W UHP lamps
•Outstanding light output of 3500 ANSI lumens*
1
•Excellent
uniformity assured with 3D Digital gamma correction
•Exclusive Sony DRC (Digital Reality Creation) generates
video pictures with effectively four times the resolution of that
from a conventional video signal •Multiscan capability with a
built-in scan converter: fH: 15 to 100 kHz, fV:40 to 120 Hz
•Power zoom, power focus and picture shift functions for
installation flexibility •Graphical on-screen menus with a
choice of seven languages for adjustment/operation •Supplied
remote commander RM-PJ1001 controls all the projector
functions •Wide range of optional lenses available •Can be
used with screens from 40 to 500 inches in size •Power
saving mode available
Supplied accessories: Remote commander RM-PJ1001
Remote commander cable (15 m)
Size AA (R6) battery (3)
AC power cord
PJ COM terminator
Lens ring
Operation manual
Installation manual
Optional accessories:
Projector quadruple lamp (for replacement) LMP-Q120
Projector individual lamp LMP-S120
1.3 times zoom standard focus lens VPLL-Z3020
1.3 times zoom standard focus lens VPLL-Z2019
1.6 times zoom long focus lens VPLL-Z2025
1.5 times zoom long focus lens VPLL-Z2039
Fixed long focus lens VPLL-3050
Fixed long focus lens VPLL-2075
Fixed short focus lens VPLL-2014
Fixed short focus lens VPLL-2009
Stack stand (for twin and triple stacking) SU-PJ2000
Suspension support PSS-2000
Suspension support PSS-10
Signal adaptor HD D-sub 15-pin to D-sub 9-pin
(for SIC Cable) ADP-10
Signal adaptor Macintosh
®
to VGA ADP-20
D-sub HD 15-pin to 5 BNC cable SMF-400
D-sub HD 15-pin to D-sub HD 15-pin SMF-401
Interface board IFB-12A/21/50/1000/X2000E
Signal interface cable SIC-20A/20C/22
Signal interface switcher PC-3000
9-pin remote cable RCC-5G/10G/30G (for RS-422A)
Remote commander RM-PJ3000S*
2
Remote control receiver RM-PJ10
100-inch flat screen VPS-100FH*
3
Specifications
Optical
Projection system: 3 LCD panels, 1 lens projection
LCD panel: 1.8-inch TFT LCD panel, 3,932,160 pixels
(1,310,720 pixels x3)
Lamp: 120 W UHP lamp (4)
Light output: 3500 ANSI lumens*
1
Projection picture size: 40-inch to 500-inch
General
Colour system: PAL/NTSC/SECAM/NTSC
4.43/PAL-M
(automatically selected)
Resolution: Video: 600 TV lines
RGB: 1280 x 1024 pixels
Scanning frequency: fH: 15 kHz to 100 kHz
fV: 40 Hz to 120 Hz
Display area: >6.4 µsec
Speaker: 5 W stereo
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: Max: 770 W (approx.), Standby: 20 W
Heat dissipation: 2628 BTU
Dimensions: 562 (W) × 237 (H) × 649 (D) mm
(22
1
⁄4 × 9
3
⁄8 × 25
5
⁄8 inches)
Mass: Approx. 34.5 kg (75 lb 14 oz)
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85% (no condensation)
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Input/Output
VIDEO IN*
4
Composite video: Loop-through BNC 1.0 Vp-p ±2 dB sync negative, 75 Ω
S VIDEO IN*
4
Y IN: BNC 1.0 Vp-p ±2 dB sync negative, 75 Ω
C IN: BNC 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
Y/C IN: Loop-through Mini DIN 4-pin
Y(luminance): 1.0 Vp-p ±2 dB sync negative, 75 Ω
C(chrominance): 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
AUDIO IN*
4
: Phono, stereo, 500 mV rms, impedance more than 47 kΩ
INPUT A
Analogue RGB/Component:
BNC × 5
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
G: 0.7 Vp-p ±2 dB positive, 75 Ω
G with sync/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
SYNC/HD
Composite sync:
0.6 to 8.0 Vp-p high impedance, sync positive/negative
Horizontal sync: 0.6 to 8.0 Vp-p high impedance, sync positive/negative
VD
Vertical sync:
0.6 to 8.0 Vp-p high impedance, sync positive/negative
HDTV*
5
(Y/PB/PR): BNC
Y: 1.0 Vp-p ±2 dB positive, 75 Ω,
Tri-level sync: ±0.3 Vp-p
Bi-level sync: 0.3 Vp-p
P
B/PR: ±0.35 Vp-p ±2 dB positive, 75 Ω
HDTV*
5
(GBR): BNC
G with sync: 1.0 Vp-p ±2 dB, 75 Ω,
Tri-level sync: ±0.3 Vp-p
Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ±2 dB positive, 75 Ω
Audio IN:
Phono, stereo, 500 mV rms, impedance more than 47 kΩ
AUDIO OUT: Phono, Max. 1 V rms when input is 500 mV rms,
impedance more than 1 kΩ
INPUT B/C: Open for optional IFB board
CONTROL S IN/ Stereo mini jack 5.0 Vp-p,
PLUG IN POWER: Plug in power DC 5 V maximum output 60 mA
CONTROL S OUT: Stereo mini jack 5.0 Vp-p
REMOTE
RS-232C/RS-422A*
6
: D-sub 9-pin (female)
PJ COM*
7
: D-sub 9-pin (2) (female)
Trig: Mini jack
Power ON: 12 V, output impedance 4.7 kΩ
Power OFF: 0 V
Safety Regulations: EN 60 950 (TÜV), CE, C-tick
*1 ANSI lumens is a measuring method of the American National Standards Institute
IT7.228.
*2 Laser Type: Class II
Wavelength: 645 nm
Output: 1 mW
*3 Not available in some areas. For details, please consult your nearest Sony office.
*4 With the optional IFB-X2000E installed in the VPL-FE100E.
*5 The VPL-FE100E/FE100M supports 1125/60/2:1 and 1125/59.94/2:1
(SMPTE-240M/274M) HDTV systems.
*6 RS-232C/RS-422A selectable.
*7 PJ COM complies with RS-485.
VPL-FE100E
VPL-FE100M