Specifications

–14–
2-1 DVCAM VTRs
VIDEOCASSETTE
RECORDERS
DSR-80P
Editing Recorder
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Long
recording time: up to 184 minutes with a standard-size
cassette and 40 minutes with a mini-size cassette •Versatile
digital interfaces: SDI*
1
, SDTI (QSDI) and AES/EBU digital
audio •Extensive analogue interfaces: composite,
component*
2
, RGB*
2
, S-Video and XLR audio •RS-422A
remote control interface •ClipLink operation •Full tape
dubbing with ClipLink Log Data via SDTI (QSDI) and
RS-422A interfaces •Frame accurate editing capability •Built-
in EBU time code generator/reader •Time base corrector
•High-speed picture search over a range of 32 times normal
speed, in both forward and reverse •Digital slow function
over a range from 0 to 0.39 times normal speed, in both
forward and reverse •Jog audio capability •SIRCS (Sony
Integrated Remote Control System) interface for the
DSRM-10 Remote Control Unit
*1 The optional DSBK-120P SDI Input/Output Board is required.
*2 Selectable by a switch on the rear panel
Supplied accessories: AC power cord
Operating instructions
ClipLink Guide
RCC-5G Remote Control Cable
Optional accessories: SDI Input/Output Board DSBK-120P
Time Code Input/Output Board DSBK-130P
Remote Control Unit DSRM-10
Rack Mount Kit RMM-130
TBC Remote Control Unit UVR-60P
Remote Control Cable RCC-5G/10G/30G
(5 m/10 m/30 m)
Specifications
General
Type: Editing recorder
Video recording system: Rotary 6 head helical scan
Luminance : FM recording
Chrominance : FM recording
Video signal system: CCIR monochrome/PAL colour
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 145 W
Operating temperature: 5 °C to 40 °C (41 °F to 104 °F)
Storage temperature: –20 °C to 60 °C (–4 °F to 140 °F)
Operating humidity: Less than 80%
Storage humidity: Less than 90%
Mass: 19 kg (41 lb 14 oz)
Dimensions: 427 (W) × 174 (H) × 494 (D) mm
(16
7
⁄8 × 6
7
⁄8 × 19
1
⁄2 inches)
excluding external projections
Tape speed: 28.221 mm/s
Recording/Playback time:
Standard size: 184 min. w/PDV-184ME/184N/184MEM
Mini size: 40 min. w/PDVM-40ME/40N/40MEM
Fast forward/Rewind time:
Standard size: Less than 3 min. w/PDV-184ME/184N/184MEM
Mini size: Less than 1 min. w/PDVM-40ME/40N/40MEM
Search speed:
When controlling via RS-422A:
Search speed is up to 32 times in forward and
reverse
When cotrolling via DSRM-10
Jog mode: Still to ×2, forward and reverse
Shuttle mode: 8 steps, still to ×16 normal speed, forward and
reverse
Digital slow mode: 3 steps, still, ×1/5 and ×1/10 normal speed, forward
and reverse
Video Performance
Band width (via analogue component I/O):
Luminance: 25 Hz to 5.5 MHz +1.0/–2.0 dB
5.75 MHz +0/-3.0 dB (Typical measurement)
Chrominance: 25 Hz to 2.0 MHz +1.0/–2.0 dB
S/N ratio (via analogue component I/O):
More than 55 dB
K-factor (K2T, KPB): Less than 2.0%
Y/C delay: Less than 30 ns
Audio Performance
Frequency response:
2CH mode (48 kHz/16-bit):
20 Hz to 20 kHz +0.5/–1.0 dB
4CH mode (32 kHz/12-bit):
20 Hz to 14.5 kHz +0.5/–1.0 dB
Dynamic range: More than 85 dB
Distortion (THD+N): Less than 0.05%
Signal Inputs
Video
REF.VIDEO (BNC x2), loop-through connection):
Black burst: 0.3 Vp-p, 75 Ω, sync negative
Composite sync: 2.0 Vp-p, 75 Ω, sync negative
(when not adding sync to RGB outputs)
VIDEO (BNC x2), loop-through connection):
Composite, 1.0 Vp-p, 75 Ω, sync negative
RGB/COMPONENT (BNC x3) (selectable):
Y/R-Y/B-Y: Y: 1.0 Vp-p, 75 Ω, sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω (100%)
R.G (w/o sync).B: 0.7 Vp-p, 75 Ω
G (w/sync): 1.0 Vp-p, 75 Ω, sync negative
S-Video (DIN 4-pin x1): Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, 75 Ω (at burst level)
SDI*
1
(BNC x2), active-through connection):
Conforms to Serial Digital Interface (270 Mb/s),
ITU-R BT.656
SDTI (QSDI) (BNC x1) Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
Audio
AUDIO (XLR 3-pin female x4):
–6/0/+4 dBu, 600 Ω on/off/–60 dBu, high impedance
AES/EBU (XLR 3-pin female x2):
110 Ω, balanced
Signal Outputs
Video
REF.VIDEO (BNC x1):
Black burst: 0.3 Vp-p, 75 Ω, sync negative
Composite sync: 2.0 Vp-p, 75 Ω, sync negative
(when not adding sync to RGB output)
VIDEO 1/2(SUPER) (BNC x2):
Composite, 1.0 Vp-p, 75 Ω, sync negative
RGB/COMPONENT (BNC x3) (selectable):
Y/R-Y/B-Y : Y: 1.0 Vp-p, 75 Ω, sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω (100%)
R.G (w/o sync).B : 0.7 Vp-p, 75 Ω
G (w/sync): 1.0 Vp-p, 75 Ω, sync negative
S-Video (DIN 4-pin x1): Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, 75 Ω (at burst level)
SDI*
1
(BNC x2): Conforms to Serial Digital Interface (270 Mb/s),
ITU-R BT.656
SDTI (QSDI) (BNC x1): Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
Audio
AUDIO (XLR 3-pin male x4):
4 dBu, 600 Ω loading, low impedance, balanced
AUDIO MONITOR (RCA phono jack x1):
–6 dBu, 47 kΩ, unbalanced
HEADPHONES (JM-60 headphone jack x1):
–16 dBu, 8 Ω, unbalanced
AES/EBU (XLR 3-pin male x2):
110 Ω, balanced
Time Code Input/Output*
2
Time Code In (BNC x1): 0.5 Vp-p to 18 Vp-p, 3 kΩ, unbalanced
Time Code Out (BNC x1): 2.2 Vp-p, 75 Ω, unbalanced
Remote
RS-422A: D-sub 9-pin (female) (1)
TBC: D-sub 15-pin (male) (1)
CONTROL-S (SIRCS): Stereo mini jack (1)
*1 Using optional DSBK-120P (SDI Input/Output Board)
*2 Using optional DSBK-130P (Time Code Input/Output Board)