Specifications

2-5 Data projector
–163–
VPD-LE100 (PAL/NTSC/ SECAM/NTSC4.43/PAL-M)
•Multiscan projector with DLP™ (Digital Light Processing™)
technology •Outstanding brightness of 10000 ANSI lumens*
1
•Three SXGA DMD™ (Digital Micromirror Device™) panels
for a total of 3,932,160 pixels (1,310,720 x 3 panels) •Multi-
scan capability with a built-in scan converter: horizontal 15 to
100 kHz, vertical 40 to 120 Hz •HDTV/DTV compatibility
•Sony Digital Reality Creation as standard while 2-3 pull
down FILM mode selected (Applicable for 525/60 system
only) •Power zoom and power focus •Excellent uniformity
•Horizontal and vertical power lens shift function •Superb
colour reproduction with a Xenon lamp •A wide range of
optional lenses covering various installation demands
•Optional IFB boards available including 4:2:2 SDI and HD
SDI board •Can be used with screens from 70 to 700 inches
in size
Supplied accessories: Remote commander RM-PJ1001
Remote commander cable (15 m)
AA size battery (3)
AC power cord
PJ COM termination
Lens ring
Operating manual
Installation manual
Optional accessories: 1.3 times zoom lens VPDL-Z1014
1.2 times zoom lens VPDL-Z1019
1.6 times zoom lens VPDL-Z1023
1.8 times zoom lens VPDL-Z1037
Projector lamp (for replacement) LMP-L2000
Signal adaptor HD D-sub 15-pin to D-sub 9-pin (for
SIC Cable) ADP-10
Signal adaptor Macintosh
®
to VGA adaptor ADP-20
D-sub HD 15-pin to 5 BNC cable SMF-400
D-sub HD 15-pin to D-sub HD 15-pin SMF-401
Interface board IFB-12A/20/21/30/1000/50/LE100
Signal interface cable SIC-20A/20B/20C/21/22
Signal interface switcher PC-3000
9 pin remote cable RCC-5G/10G/30G (for RS-422A)
Remote commander RM-PJ3000S
Remote control receiver RM-PJ10
100-inch flat screen VPS-100FH*
2
120-inch flat screen VPS-120FH*
2
Specifications
Optical
Projection system: 3 SXGA DMD panels, 3 panel prism colour
integration system
DMD panel: 3,932,160 pixels (1,310,720 × 3 panels)
Lamp: Xenon lamp
Light output: 10000 ANSI lumens*
1
Screen coverage: 70 to 700 inches
General
Colour system: PAL/NTSC/SECAM/NTSC
4.43/PAL-M automatically
selected (with optional IFB board; either
IFB-12A/1000 incorporated)
Resolution: 600 TV lines (video)
1280 x 1024 pixels (RGB)
Scanning frequency: Horizontal: 15 kHz to 100 kHz
Vertical: 40 Hz to 120 Hz
Display area: >6.4 usec
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: Approx. 2.8 kW, Standby: approx. 40 W
Heat dissipation: 9556 BTU
Operating temperature: 10 to 35 °C (50 to 104 °F)
Operating humidity: 35 to 85% (No condensation)
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90%
Dimensions: 750 (W) × 340 (H) × 1000 (D) mm
(29
5
⁄8 × 13
1
⁄2 × 39
3
⁄8 inches)
Mass: Approx. 95 kg (209 lb)
DISPLAY
PRODUCTS
Inputs/Outputs
Input A:
Analogue RGB/
Component: BNC x 5
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
G: 0.7 Vp-p ±2 dB positive, 75 Ω
Y/G with sync: 1.0 Vp-p V ±2 dB sync negative, 75 Ω
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω
SYNC/HD
Composite sync: 0.6 to 8.0 Vp-p, high impedance, sync
positive/negative
Horizontal sync: 0.6 to 8.0 Vp-p, high impedance, sync
positive/negative
Vertical sync: 0.6 to 8.0 Vp-p high impedance, sync
positive/negative
STV/HDVS (Y/P B /P R ): BNC
Y: 1.0 Vp-p ±2 dB positive, 75 Ω
Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
P
B/PR: ±0.35 Vp-p ±2 dB positive, 75 Ω
DTV/HDVS (GBR): BNC
G with sync: 1.0 Vp-p ±2 dB, 75 Ω
Tri-level sync: ±0.3 Vp-p, Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ±2 dB positive, 75 Ω
Input B/C: Open for optional IFB board
Input D: Open for optional IFB-LE100
CONTROL S IN/ Stereo mini-jack 5.0 Vp-p,
PLUG IN POWER: Plug in power DC 5 V, max. output 60 mA
CONTROL S OUT: Stereo mini jack 5.0 Vp-p
REMOTE I/F
RS-232C/422A: D-sub 9-pin (female) selectable
TRIG: Mini-jack
Power On: 12 V
Power Off: 0 V
Output impedance: 4.7 kΩ
Safety regulations: UL1950, cUL950, FCC Class A, IC Class A, VCCI
Class A, JEIDA, EN60 950 (TÜV), CE, C-tick
*
1
ANSI lumens is a measuring method of the American National Standard Institute IT7.228.
*
2
Not available in some areas. For details, please consult your nearest Sony office.