Specifications

–166–
PC-3000
Signal Interface Switcher for VPH-G90E/G90M,
VPL-FE100E/FE100M/FX200E/FX200M and
VPD-LE100
•Provides eight slots for optional interface boards and one
fixed output with 150 MHz cable compensation •Up to eight
PC-3000 units can be connected, enabling up to 57 different
signals to be connected in a system •RGB bandwidth of 300
MHz •Equipped with an RS-232C/RS422A communication
port •Equipped with a PJ COM port, in accordance with
RS-485 •Incorporates an LCD display in the front panel for
easier setting and adjustments •Input selection of a
connected projector, as well as the input selection of the
PC-3000 itself, can be controlled via the front panel •Last
channel memory •Can be easily controlled with optional
remote commander RM-PJ3000S •Trig terminal to provide
control of an integrated projection room •19-inch EIA
standard rack mountable with supplied rack mount kit
Supplied accessories: AC cable
Rack mount kit for 19-inch EIA standard rack
Operating instructions
Terminator
Optional accessories: Remote commander RM-PJ3000S
9-pin remote control cable RCC-5G/10G/30G
(for PJ COM and RS-422A)
Specifications
General
RGB bandwidth: 300 MHz -3 dB
Power requirements: 100 to 240 V, 50/60 Hz
Power consumption: 80 W
Dimensions: 424 (W) × 133 (H) × 420 (D) mm
(16
11
⁄16 × 5
1
⁄4 × 16
17
⁄32 inches)
Mass: 9.3 kg (20 lb 7 oz)
Outputs
BNC connector (8), DIN 4-pin (1)
Video signal: Gain unity, impedance 75 Ω
Sync signal: 5 Vp-p (Impedance high)
1 Vp-p (Impedance 75 Ω)
Audio: Gain unity, impedance 1 kΩ
CONTROL S IN/ Stereo mini jack, 5 Vp-p
PLUG IN POWER: DC 5 V, max. output 60 mA
CONTROL S OUT: Stereo mini jack, 5 Vp-p
TRIG: Mini jack
Power ON: DC 12 V, output impedance 4.7 kΩ
Power OFF: 0 V
Remote
RS-232C/422A: D-sub 9-pin (Female)
PJ COM IN/OUT: D-sub 9-pin (Female)
Remote 2: Half pitch 26-pin
*With optional IFB-40, the PC-3000 is also compatible with other current projectors.
DISPLAY
PRODUCTS
2-6 Projector accessories