Specifications

–187–
ADN-8080 (PAL/NTSC/SECAM)
JJTRON Display System
•16:9 aspect, 80-inch LED-based display for indoor
advertising •8 mm pitch Surface Mounted Device type LEDs,
with each pixel made up of individual R, G and B LEDs •High
brightness of 1,000 cd/m
2
for indoor use •224 x 120 pixel
resolution •Signal processor and screen in one “Plug and
Play” system •High contrast and reliability assured with the
“Black Mask” on the screen surface •Lightweight and
compact •Full 10-bit digital processing (1024 colour
gradation) •Advanced colour reproduction with the colour
compensation circuit •On-screen menu for adjustment/setting
•Various remote control capabilities: supplied remote
commander RM-JJ100, Control S and RS-422
Supplied accessories: Remote commander RM-JJ100
Remote control cable (15 m)
Optional accessory: Video input board BKJ-100
Remote control receiver RM-PJ10
Specifications
Picture performance
Device: Full color one-chip SMD type LED
Pixel pitch: 8 mm × 8 mm
Viewable picture area: 1792 (W) × 960 (H) mm (70
5
⁄8 × 37
7
⁄8 inches)
2033 mm (measured diagonally) (80 inches)
Aspect ratio: 16:9
Color system: PAL/NTSC/SECAM automatic switching
(When BKJ-100 is attached)
Brightness: 1,000 cd/m
2
(white peak initial value)
Pixel density: 15,625 pixels/m
2
Number of pixels (RGB trio):
224 (W) × 120 (H) = 26,880 dots
Colour temperature: 7000 K
Signal processing: Full 10 bit
Viewing angle: Horizontal 145°
Vertical 145°
LED half brightness period:
40000 H (Video), 70000 H (All white)
General
Dimensions: 1880 (W) × 1060 (H) × 260 (D) mm (approx.)
(74
1
⁄8 × 41
3
⁄4 × 10
1
⁄4 inches)
Current consumption: Max. 12 A
Power requirements: AC 200 to 240 V ±10%, 50/60 Hz
Mass: 110 kg (approx.) (50 lbs)
Waterproofing: Not applicable (indoor use only)
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85% (without condensation)
Storage temperature: -20 to 60 °C (-4 to 140 °F)
Storage humidity: 10 to 90% (without condensation)
Inputs
INPUT A:
Frequency (fH/fV): 31.25 kHz/50 Hz, 31.5 kHz/60 Hz
Double scanned RGB:
BNC × 5
R: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
G: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
Sync on G: 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
B: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
HD/COMP SYNC:
Composite sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
terminated
Horizontal sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
terminated
VD:
Vertical sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
terminated
Remote:
Control S IN/OUT: Mini jack, 5.0 Vp-p
RS-422 IN/OUT: D-sub 9-pin (Female)
DISPLAY
PRODUCTS
INPUT B (when BKJ-100 is attached):
Frequency (fH/fV): 15.625 kHz/50 Hz, 15.75 kHz/60 Hz
Composite video: BNC × 1, 1.0 Vp-p, sync negative, 75 Ω terminated
Analogue RGB/YUV: BNC × 5
R/R-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
G: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
Sync on G/Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω terminated
B/B-Y: 0.7 Vp-p ±2 dB positive, 75 Ω terminated
HD/COMP SYNC:
Composite sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
terminated
Horizontal sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
terminated
VD:
Vertical sync: 1.0 to 4.0 Vp-p sync positive/negative, 75 Ω
terminated
Regulation compliance
UL (1950), c-UL (CSA C 22.2 No. 950),
TUV (EN 60950), FCC Class A, IC Class A,
CE Class B, C-Tick, VCCI Class A, JEIDA
3-1 JJTRON