Specifications

–202–
2-2 Colour video printers
UP-7300MDP
Colour video printer
•High quality full colour print with digital process in the frame
memory in 8-bit/256 gradations, and over 16 million colours
per pixel •Its thermal head, with 1280 picture element dots,
reproduces a high quality output with a resolution of 6.4
dots/mm •A4 size print (210 × 297mm/
8
3
/8 × 11
3
/4 inches) in approx. 125 seconds and a black and
white image in approx. 60 seconds •OHP transparency
prints for effective presentations •Multiscan capability; inputs
over a wide range of horizontal scanning frequencies- 15kHz
to 89kHz- is acceptable •Multiple inputs; four BNC
connectors for 625 analogue RGB signal input, DIN 4-pin for
Y/C input and a BNC connector for PAL composite signal
input, and DN 50-pin multiple connector for analogue RGB
high scan signal for connection with variety of computers
and HDVS with optional cables •Menu operation with the
function menu displayed on the printer’s LCD and on an
associated monitor •Set-up menu; horizontal and vertical
picture size, H/V picture shift, aspect ratio, etc. •Up to 20
copies of consective printing capable •Various print modes;
two, four, six, eight or sixteen different or duplicated image
memory prints (625 line video images), four or six different
image print mode (high scan images) •Remote control from
a supplied wired or wireless remote control unit, or an
extemal PC •Complies with the MDD
Supplied accessories: Remote control unit (wired/wireless)
Cable for remote control unit (5 m)
Ink ribbon holders for colour, B&W and OHP materials
Paper tray
Paper cover
Battery SUM-3 (2)
AC power cable
Operation and instruction manual
Optional Accessories Colour print pack UPC-7010P (for 100 prints)
Black and white print pack UPC-7020 (for 100 prints)
OHP print pack UPC-7030 (for 100 prints)
RS-232C cross cable SMF-1015
Video interface cable for Macintosh UPZ-7000M
Video interface cable for IBM PS55, PS/2, PS/V
UPZ-7000I
Interface cable for workstation UPZ-7001, UPZ-7002,
UPZ-7003
Specifications
Printing method: Dye transfer sublimation thermal printing
Thermal head: 1280 elements (6.4 dots/mm)
Printing paper size: A4 (210 × 297 mm8
3
/8 × 11
3
/4 inches) using the
optional UPC-7010P
Picture size: <625/50 line signal>
Max. 184 × 241mm (7
1
/4 × 9
1
/2 inches)
<Hi-scan signal>
Max. 190 × 246mm (7
1
/2 × 9
3
/4 inches)
Gradations: 256 levels process (Yellow, Magenta, Cyan)
over 16 million colours per pixel
Scanning frequency: 15kHz to 89kHz
Picture memory: Six frame memories (9MB)
Printing time: Approx. 125 seconds - Colour, Macintosh II print
Approx. 60 seconds - B & W print
Input: RGB analogue for Hi-Scan or HDVS signal*(DN 50-pin)
RGB: 0.7Vp-p, 75Ω
Sync: 1.0 to 5.0Vp-p, 75Ω
RGB analogue (625 line system) signal* (BNC ×4)
RGB: 0.7Vp-p, 75Ω, unbalanced
Sync: 0.3 to 4.0Vp-p, negative, 75Ω, unbalanced
S-Video (Y/C separate, DIN 4-pin S terminal)
Y: 0.5 to 2.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC)
CCIR/PAL 0.5 to 2.0Vp-p, sync negative, 75Ω,
unbalanced
STILL IMAGE
PRODUCTS
Output: RGB analogue for Hi-Scan or HDVS signal (DN 50-pin)*
RGB: 0.7Vp-p, 75Ω
Sync: Through output
RGB analogue signal (625 line scan) (BNC ×4)
RGB: 0.7Vp-p, 75Ω, unbalanced
Sync: 1.0Vp-p, negative, 75Ω, unbalanced
S-Video (Y/C separate, DIN 4-pin S terminal)
Y: 1.0Vp-p, sync negative, 75Ω, unbalanced
C: 0.3Vp-p, 75Ω, unbalanced
Composite video (BNC)
CCIR/PAL 1.0Vp-p, sync negative, 75Ω, unbalanced
Control terminal: RS-232C (D-sub 25-pin)
REMOTE 1: Remote control jack (special mini)
REMOTE 2: Foot switch jack (stereo mini)
Power requirement: AC 200 to 240V, 50/60Hz
Power consumption: 290W
Dimensions: 424(W) × 177(H) × 490(D)mm
(16
3
/4 × 7 × 19
3
/8 inches)
Mass: Approx. 19.2kg (42 lb)
Safety regulations: EN60950, EN6060-1, BZT, MDD
* Note: The UP-7300MDP can accept sync-on-G or external sync automatically.