Specifications

–22–
DRV-1000P
DVCAM Drive
•Superb picture quality of the DVCAM format •Playback
capability of DV recorded tapes (SP mode only) •Designed to
fit in a standard 5.25-inch disk drive PC bay •i.LINK (DV
In/Out) interface providing a single cable connection to
simultaneously transfer data and control signals as well as
digital video and audio signals, with virtually no generation
loss •LANC interface for simple editing with a LANC-
equipped recorder or editing system •Analogue video and
audio outputs •DC power operation
SPECIFICATIONS
GENERAL
Mass: Approx. 1.4 kg (3 lb 1 oz)
Dimensions: 149.2 (W) × 42.8 (H) × 225 (D) mm
(5
7
/8 × 1
11
/16 × 8
7
/8 ) inches
Maximum Dimensions (unload):
149.2 (W) × 68.0 (H) × 305 (D) mm
Power Requirement: +5 V: 5 A (Max) /700 mA (Stop)
+12 V: 0.8 A (Max) /130 mA (loading/unloading)
Power Consumption: +5 V: 25 VA (Max)
+12 V: 9.6 VA (Max)
Operating Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)
Storage Temperature: -20 °C ~ 60 °C (-4 °F ~ 140 °F)
Tape Speed: 28.2 mm/s (DVCAM mode)
VIDEO
Video Signal: CCIR standards, PAL colour
Video Output: Composite (RCA pin):
1.0 Vp-p, 75 Ω, unbalanced, sync negative
S-video (mini-DIN 4-pin):
Y: 1.0Vp-p, 75 Ω, unbalanced, sync negative
C: 0.3 Vp-p (subcarrier burst), 75 Ω, unbalanced
AUDIO
Audio Signals: 48 kHz/16-bit, 32 kHz/12-bit, 32 kHz/16-bit
44.1 kHz/16-bit (depending on input signals)
Output: PIN jacks (2) (L, R)
Output Level: 327 mV with 47 kΩ load or more
Impedance: 2.2 kΩ
Digital IN/OUT: i.LNIK (DV IN/OUT), IEEE1394-based, 4-pin (1)
Other Connectors: LANC: stereo mini-mini jack
EJECT: monaural mini jack, TTL input
low active (more than 100ms)
DC IN: PC-standard, +5 V/12 V/GND
Supplied Accessories: Operation manual (1)
DV cable (4p - 4p, 50 cm)
Stereo AV cable (1)
S video cable (1)
Mounting Screw ( 4)
VIDEOCASSETTE
RECORDERS
2-1 DVCAM VTRs