Specifications

–242–
SURVEILLANCE
PRODUCTS
1-1. Colour video cameras
SSC-C370P
CCD colour video camera
•Especially designed for surveillance applications •High
density 1/2-inch IT Hyper HAD CCD offers extremely high
resolution of 470 TV lines and high sensitivity with a
minimum illumination of 2.5 lx (F1.2) •Excellent signal-to-
noise ratio of 48 dB •CCD IRIS function allows use of
inexpensive manual iris lenses •Two alternative automatic
white balance control modes: AWB (Auto White
Balance)/ATW (Auto Tracing White Balance) •Variable
speed electronic shutter •Accepts C-mount lenses •External
synchronization with VS or VBS* •Single cable operation
(video/sync/power triple multiplexing transmission) for easy
installation with the optional YS-W150P/W250P Camera
Adaptor (Mode A) •Monitor out function for on-the-spot
camera positioning (Mode A) •12 V DC power supply can
also be used (Mode B)
Supplied accessories: Lens connector
Lens mount cap
Operating instruction manual
Optional accessories: Camera adaptor YS-W150P, YS-W250P
Manual iris lens VCL-S03XM (3.6 mm, F1.6)
VCL-S06XM (6.0 mm, F1.2)
VCL-S12XM (12 mm, F1.2)
Auto iris lens VCL-S03XEA (3.6 mm, F1.6)
VCL-S06XEA (6.0 mm, F1.2)
VCL-S12XEA (12 mm, F1.2)
Specifications
Image device: 1/2-inch Interline Transfer Hyper HAD CCD
Picture elements: 752(H) × 582(V)
Sensing area: 6.3 mm × 4.7 mm
Video signal system: PAL standard
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal or external with VS (VBS)*
Horizontal resolution: 470 TV lines
Lens mount: C-mount (Back focus adjustable)
Minimum illumination: AGC ON
2.5 lx at F1.2
Enhancer: 3H
Automatic Gain Control: ON/OFF switchable
Electronic shutter: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000 (seconds)
Phase control: H-phase control
CCD IRIS control: ON/OFF switchable
White balance: ATW/AWB switchable
Signal-to-noise ratio: 48 dB (AGC OFF)
Video out: 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: –10 to 50°C (14 to 122°F)
Storage temperature: –40 to 60°C (–40 to 140°F)
Power requirements: DC 24 V from YS-W150P/W250P or DC
12 V from DC 12 V power supply
Power consumption: 4.0 W supplied from YS-W150P/W250P or
2.8 W at DC 12 V
Maximum cable length: 300 m using RG-59B/U (3C-2V)
500 m using RG-6A/U (5C-2V)
600 m using RG-11A/U (7C-2V)
Mass: Approx. 660 g (1 lb 7 oz)
Connectors: DC 12 V terminals, LENS (4-pin)
Mode A (Triple multiplexing operation): DC IN/VS
IN/VIDEO OUT (BNC), MONITOR OUT (BNC)
Mode B (DC 12 V operation): VIDEO OUT (BNC),
VS IN (BNC)
Lens is optional
64 (2
5
⁄8)
155 (6
1
⁄8)
164.9 (6
1
⁄2)
40.5 (1
5
⁄8)
Unit: mm (inch)
57 (2
1
⁄4)
Dimensions
*The SSC-C370P accepts VBS signals for external synchronization, however, the burst signal is not locked.