Specifications

2-2 DVCAM VTR accessories
–24–
DSBK-140
i.LINK/DV Input/Output Board
(for DSR-70P)
This board enables frame accurate editing
between the DSR-70P and a consumer DV
camcorder*
1
or between two DSR-70P units
via i.LINK interface. This i.LINK interface
treats compressed DV audio/video and
control signals, which allow the single cable
connection with no deterioration of video
and audio quality.
*1 Sony DV camcorders only
DSBK-150
SDTI (QSDI) Input/Output Board
(for DSR-70P)
This board enables a direct digital
connection with other SDTI (QSDI)
equipped machines such as the
DSR-2000P/85P/80P/60P DVCAM VTRs
and EditStation systems. This interface also
allows source material to be dubbed and
edited with no deterioration of video and
audio quality.
Connector: Input : BNC (1)
Output : BNC (1)
Supplied accessories:
Connector Cap (2)
Operation Manual
DSBK-160
SDI Input/Output Board
(for DSR-70P)
This board enables a digital connection with
a DNW-A25 Betacam SX portable editing
recorder or other SDI-equipped machines.
When the DSR-70P is connected with
DNW-A25P, not only DVCAM-to-Betacam
SX editing, but Betacam SP-to-DVCAM
editing is also available because of the
analogue playback capability of the DNW-
A25P.
Connector: Input : BNC (1)
Output : BNC (2)
Supplied accessories:
Connector Cap (3)
Operation Manual
DSBK-170
Analogue Component
Input/Output Board
(for DSR-70P)
This board enables analogue component
signals to be used to work with the
conventional analogue component editing
systems.
Connector: Input/Output : BNC (3)
(selectable by switching)
Supplied accessories:
Connector Cap (3)
Operation Manual
VIDEOCASSETTE
RECORDERS
Connector: Input/Output : 6-pin (1)
Supplied accessories:
DV Cable : 6-pin-4-pin
(1 m/3.3 ft) (1)
DV Cable : 6-pin-6-pin
(35 cm/1.1 ft) (1)
Connector Cap (1)
Operation Manual