Specifications

5. Multiplexers
–258–
SURVEILLANCE
PRODUCTS
YS-DX316P/DX216CE
Multiplexer
•Full duplex video multiplexer with up to 16 camera inputs
•Either asynchronous or synchronous cameras can be
connected •Multiplex recording to one VCR while switching
between each camera by a field for precise surveillance of
multiple points •Long time recording with Time Lapse VCR
•Video loop through for up to 16 cameras •Live pictures can
be displayed in full screen, sequence, multi-screen
(4/7/10/13/16) while simultaneously recording •Auto
sequential switching in quad mode in addition to full screen
sequence switching •Playback can be reviewed in full
screen, sequence, and multi-screen (4/7/10/13/16)
•Recorded images can be played back in the bottom right
screen of the 13 or 16-picture display simultaneously with
live images •Live images can be displayed in the bottom right
screen of the 13 or 16-picture display simultaneously with
recorded images •MONITOR 2 can be used for spot
monitoring •Freeze picture function in both live and playback
mode •Electronic zoom (x2) function in both live and play
back mode •Built in time/date and camera title generator
•Easy on screen setup •16 alarm inputs, each corresponding
to a camera input •Programmable freeze, zoom and buzzer
functions in 16-picture split mode for alarm inputs •Alarm
monitor function automatically provides independent
monitoring of channels in which alarms occur on MONITOR
2 •Programmable alarm recording time mode •Alarm memory
function can store up to 100 alarm events (camera number,
date and time) •Video loss detection function •Remote
control capability via a D-sub 25-pin •Compact 1U height unit
and rack mount capability
Supplied accessories: Rack mount kit (for EIA standard rack) (1)
D-sub 25-pin plug components (1)
Operating manual (1)
Specifications
General
Video Signal System: DX316P: PAL standard, DX216CE: CCIR standard
Power requirements: AC 120 V, 50 Hz
Power consumption: DX316P: 22 W
DX216CE: 16W
Operating temperature: 0 to 45° C (32 to 113° F)
Mass: 4.2 kg (9 lb 4 oz)
Video inputs
Camera input 1 to 16: DX316P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
DX216CE: BNC type, VS, 1.0 Vp-p, 75 Ω
VCR input: DX316P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω, Auto
termination type
DX216CE: BNC type, VS, 1.0 Vp-p, 75 W
S-VHS Y/C inputs: DX316P only: Din Connector, Y: 1.0 Vp-p, 75 Ω
C: 0.286 Vp-p, 75 Ω
Video outputs
Camera output 1 to 16: DX316P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
DX216CE: BNC type, VS, 1.0 Vp-p, 75 Ω
Monitor 1 output: DX316P: BNC type x 1, VS or VBS
DX216CE: BNC type x 1, VS
Monitor 2 output: DX316P: BNC type x 1, VS or VBS
DX216CE: BNC type x 1, VS
VCR output: DX316P: BNC type, VS or VBS, 1.0 Vp-p, 75 Ω
DX216CE: BNC type, VS, 1.0 Vp-p, 75 Ω
S-VHS Y/C output: DX316P only: Din Connector, Y: 1.0 Vp-p, 75 Ω
C: 0.286 Vp-p, 75 Ω
Other
Synchronization: Asynchronous individual inputs
Alarm output: DC 5 V 5.7 kW
Alarm duration: 10, 20, 30, 40, 50, 60, CC* s
Switch input from VCR: Low active 100 kW pull-up
Control terminal: D-sub 25 pin:
Alarm input: contact close (x 16)
Remote control input
Sequence time: 0.5 to 30 s (0.5 s increments)
On-screen display: 8 character title, date/time
Buzzer: ON/OFF
* Stays in alarm mode for as long as alarm input remains active
YS-DX316P
YS-DX316P
YS-DX216CE
YS-DX216CE
Dimensions