Specifications

6-1. Time lapse video recorders
–261–
SURVEILLANCE
PRODUCTS
Audio
Audio recording mode: 3, 12 and 24-hour mode
Input: –7.8 dBu, 47 kΩ (phono jack)
Output: –7.8 dBu, 600 Ω (phono jack)
Microphone input: –60 dBu, 600 Ω (ø3.5 mm mini jack)
Others
Alarm input: Low level
Alarm output: +5 V, 5.7 kΩ (Low active)
Switch output: +5 V, 5.7 kΩ (Low active)
Tape end output: +5 V, 5.7 kΩ (Low active)
Warning output: +5 V, 5.7 kΩ (Low active)
Timer output: +12 V, 5.7 kΩ (high active)
External timer input: Low level
Clock set output: +5 V, 5.7 kΩ (Low active)
Clock set input: Low level
Series output: +5 V, 5.7 kΩ (Low active)
Series input: Low level
One-shot input: Low level
Alarm reset: Low level
Control terminals: ø3.5 mm mini jack
Optional RS-232C interface (D-sub 9-pin)
SVT-5050P
Colour time lapse videocassette recorder
•12 different time lapse recording/playback modes are
available in addition to the standard mode (3 hour time
mode) with a normal 180-minute tape
Note: In time lapse modes, it is possible to additionally record three hours
longer than the original modes.
•Adaptive Picture Control (APC) delivers optimum picture
quality to the recording image •A tape recorded in the 3-hour
mode can be played back by any VHS VCR •Audio recording
and playback are possible in 3,12 and 24-hour modes •Built-
in time and date generator allows a required scene to be
easily searched by presetting the desired time and date
•Multiple recording modes such as Auto Repeat Recording,
Timer Recording, Alarm Recording, One-shot Recording and
Series Recording for versatile situations •Holiday setting
function •Daylight Saving Time setting function •Quick
recording check function •By using alarm recall/scan/search
functions, pictures recorded during alarm mode can also be
easily checked •Field-by-field picture playback capability
•External timer input capability •Automatic clock adjusting
possible when several VCRs connected •On-screen display
permits easy-to-follow operation •Auto head cleaning
function •Tape before-end signal output/Tape-end output
capability •Warning signal output capability •Buzzer setting
function •Power-failure protection for up to 30 days •Security
lock function for avoiding accidental operation errors
•External control capability via an optional RS-232C interface
•Remote control capability of basic operational functions
through ø3.5mm mini jack
Supplied accessories: AC power cord
Operating instruction manual
Optional accessories: RS-232C interface board SVT-RS1A
Remote control unit SVT-RM10
TLV parts kit TPK-887P
Specifications
General
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 18 W
Operating temperature: 5 to 40°C (41 to 104°F)
Operating humidity: Less than 80%
Dimensions: 420 (W) × 100 (H) × 349 (D) mm
(16
5
/8 × 4 × 13
3
/4 inches)
Mass: Approx. 5.5 kg (12 lb 2 oz)
Tape speed: 23.39 mm/sec (3-hour mode)
Recording/playback time:3, 12, 24, 48, 72, 96, 120, 168, 240, 360, 480, 720
and 960 hours (with an E-180 tape) (One shot mode
is also available)
Alarm recording speed: 3, 12-hour mode, NC*
1
Alarm recording duration:20 s, 40 s, 1 m, 2 m, 3 m, 4 m, 5 m, CC*
2
Fast forward/rewind time:Approx. 4 minutes (with an E-180 tape)
Video
Recording system: Rotary four-head helical scanning system
Luminance signal: FM recording
Colour signal: Low-pass band-pass transformation
direct recording
Input: 1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Output: 1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Horizontal resolution: Colour mode: More than 240 TV lines
Black & White mode: More than 350 TV lines
Signal-to-noise ratio: 43 dB
TIME MODE (h) 3 12 24 48 72 96 120 168 240 360 480 720 960
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5 0.66 0.82 1.14 1.62 2.42 3.22 4.82 6.42
Notes: *1 No change of recording speed
*2 Duration of alarm recording continues for as long as alarm input remains active.